686272
8
Zoom out
Zoom in
Previous page
1/18
Next page
EN
2.7 Operating functions
1. Welding current adjustment knob
2. Welding process selection button
3. Welding current meter display
4. Machine ’ON’ green light
5. VRD SAFE light. Solid green VRD safe ’ON’. Solid red if VRD failure.
6. Overheating indicator
7. Remote control ON/OFF button
1.
3.
6.
5.
2.
7.
4.
Main switch and 'ON' indicator
When you turn the main switch to position I, the machine ’ON’ indicator light (item 4) is
illuminated and the unit is ready for welding. The indicator light is always on when the unit is
connected to the mains and the main switch is in position I. In normal conditions the machine
panel ’ON lights status is solid green. But if the machine is locked down, the light status is
ashing and the machine will not weld. The machine should be reset via the main switch. If
the light continues to ash, contact your Kemppi service shop.
NOTE! Always start and stop the machine from the main switch, never use the plug as a switch!
Indicator 'VRD safe ON'
Minarc Evo VRD models reduce the open circuit voltage (OCV) at a low level. At switch on, the
VRD indicator light (item 5) is solid green, indicating normal VRD safe limits. If VRD limits are
exceeded the machine switches to 'LOCK DOWN' state and the VRD safe light changes colour
to solid 'RED'. Welding is prevented and the main 'ON' panel light is also ashing. The machine
should be reset via the main switch. If the machine locked status continues, contact your
Kemppi service shop.
Welding process selector, MMA/TIG
This switch is used for selecting either MMA or TIG welding mode, depending on the welding
process chosen.
Regulating welding current
The welding current level is regulated via a stepless adjustment knob. Set the welding current
level according to the target weld piece, position and electrode type and size.
Minarc Evo 180
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Minarc Evo 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Minarc Evo 180 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kemppi Minarc Evo 180

Kemppi Minarc Evo 180 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info