686382

Kemppi Kemparc SYN 400 Manual

15
Zoom out
Zoom in
Previous page
1/26
Next page
EN
2.2.11 Synergetic 1-MIG welding and WiseThin welding
In synergetic 1-MIG welding, the machine selects the optimal welding parameters suitable to
the ller wire and shield gas using the programs, or synergetic curves, stored in the control
panel. The welder controls the welding by adjusting the welding power and arc length.
The synergetic WiseThin process (advanced auto arc) is a synergetic welding process
developed for the special needs of robotic welding with weldig characteristics optimised
particularly for welding automation.
Selecting a welding program
1. Before you start welding, nd the welding program suitable to your ller wire and shield
gas in the tables below and then activate the program as follows:
2. Press the SYNERGIC PROGRAM button P7 for more than 1 second. This will activate
program selection and the control panel displays start ashing.
3. Select the material group with the left-hand side control knob and the welding program
for the material group with the right-hand side control knob according to the tables
below. The program you selected is immediately recorded in the memory.
4. Press ESC button or the SYNERGIC PROGRAM button P7 to exit the menu.
MIG programs in the KempArc SYN machine
1-MIG, Fe group
Program number Wire, mm Material Shield gas
101 0,8 Fe Ar+18%-25%CO
102 0,9 Fe Ar+18%-25%CO
103 1,0 Fe Ar+18%-25%CO
104 1,2 Fe Ar+18%-25%CO
106 1,6 Fe Ar+18%-25%CO
111 0,8 Fe CO
112 0,9 Fe CO
113 1,0 Fe CO
114 1,2 Fe CO
116 1,6 Fe CO
121 0,8 Fe Ar+8%CO
122 0,9 Fe Ar+8%CO
123 1,0 Fe Ar+8%CO
124 1,2 Fe Ar+8%CO
126 1,6 Fe Ar+8%CO
152 0,9 FEMC Ar+18%-25%CO
154 1,2 FEMC Ar+18%-25%CO
164 1,2 FEMC CO
174 1,2 FEFC rutile Ar+18%-25%CO
184 1,2 FEFC rutile CO
194 1,2 FEFC basic Ar+18%-25%CO
13
KempArc SYN 300, 400, 500, DT 400 / © Kemppi Oy / 1117
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Kemparc SYN 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Kemparc SYN 400 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info