686382
13
Zoom out
Zoom in
Previous page
1/26
Next page
EN
Specifying the SETUP settings for additional features
To set the values of the functional parameters for additional MIG features, use either the
SETUP feature in the control panel (see 2.2.12 "SETUP functions in the control panel") or the
QUICK SETUP feature, which you can activate by pressing the QUICK SETUP button, P8.
Select the parameter to adjust using the left-hand side control knob P11 or the button P10
and then set the parameter value with the right-hand side control know P13. The value
you specied is instantly stored in the control panel memory. The following table lists the
parameter values that can be specied for additional MIG features.
Name of
parameter
Name
displayed
Parameter values Factory setting Description
Creep Start Level
Cre 10 ... 170 % 50 % Percent of wire feed
speed default
10% refers to slow start,
170% refers to fast start
Hot Start Level
Hot -50 ... 75 % 30 % Percent of welding power:
-50% refers to cold start
+75% refers to hot start
Hot Start Time
H2t 0 ... 9.9 s 1.2 s The duration of the hot start in
seconds.
Crater Fill Start
Level
CrS 10 ... 90 % 90 % The welding power at the
beginning of the crater ll stage as
a percentage of the welding power
preset value.
Crater Fill End
Level
CrL 10 ... 90 % 30 % The welding power at the end of
the crater ll stage as a percentage
of the welding power preset value.
Crater Fill Time
Crt 0 ... 9.9 s 2 s The duration of the crater ll stage
in seconds.
NOTE! In crater ll, the initial value of the welding power must be greater than the nal value,
and therefore the adjustment ranges for the initial and nal values are restricted automatically, if
necessary.
Welding Level
Crater Fill Start Level
Crater Fill Time
Crater Fill End Level
11
KempArc SYN 300, 400, 500, DT 400 / © Kemppi Oy / 1117
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Kemparc SYN 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Kemparc SYN 400 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info