686414
21
Zoom out
Zoom in
Previous page
1/30
Next page
19
© Kemppi Oy / 1515
EN
Control *
USER, PANEL,
REMOTE, GUN.
Factory settings is USER This setting aects the XF 37 (or XF 38)
control panel remote control unit selection.
USER: User can select the remote control
device at XF 37 (or XF 38) panel
PANEL: Selection is locked to PANEL, and
user can not select the remote device at
XF37 panel.
REMOTE: Selection is locked to HAND
REMOTE device.
GUN: Selection is locked to GUN REMOTE
device.
RemoteAutoRecog
ON, OFF. Factory setting is ON Automatic remote control unit recognition.
ON: Remote control units are recognized.
Wire feeder panel XF 37 (or XF 38) jumps
to PANEL selection, if the selected remote
control unit disappears.
OFF: Remote control units are not
recognized. Remote control unit selection
remains unchanged if the selected remote
control unit disappears.
MIG CurrentDisp
ON, OFF Factory setting is OFF ON: Displays amperage (A) preset values
OFF: Displays wire feed speed (m/min).
WFMotorWarnLev
1.5…5.0 A Factory setting is 3.5A The alarm level of wire feed motor current.
Check/service wire feed mechanism,
adjustment and gun components.
WF End Step
ON, OFF Factory setting is OFF ON: The ller wire steps forward at the end
of the welding cycle.
OFF: Filler wire remains static at the end of
the welding cycle.
AutoWireInch
ON, OFF Factory setting is ON Automatic SuperSnake Wire Inch feature.
When ON, the Wire Inch button drives the
ller wire automatically up to SuperSnake.
Gas Guard
ON, OFF Factory setting is OFF Turns the gas guard on and o, provided
that one is installed.
ArcVoltage
ON, OFF Factory setting is OFF Measured and calculated arc voltage.
This must be calibrated using voltage
measurement cable.
If ON, welding panel and subfeeder/R30
shows arc voltage value in voltage display.
SubFeederLength
10...25 m Factory setting is 10 m Sub feeder length selection for arc voltage
calculation.
* When connecting a remote control device to the power source in MMA/CC/CV welding,
you don't need to make adjustments to this setting. Remote control device is automatically
recognised, when USER option is selected (default) and RemoteAutoRecog=ON.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi FastMig X 350MV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi FastMig X 350MV in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info