Manual Kemppi A7 TIG Orbital System 300 (page 38 of 61) (English)

686409

Zoom out

Zoom in

1/61

A7 TIG Orbital System 300© Kemppi Oy 2016 1615

OPERATING MANUAL

3.8 Editing a weld program

To select weld number to edit:

1. Move cursor to Edit. Press Select.

2. Edit weld parameters. Use cursor to select an item.

Modify with the control knob.

Certain items may not be modied. The cursor will pass

these items.

3. Use Next to move through levels, editing them as

you go.

4. Use Enter to copy one level parameters to the next,

but remember that you will override the original

parameters.

To add/remove a pass:

In Edit mode, proceed to the nal pass/level. The next

screen allows a pass to be added or removed anywhere

in the program.

To save weld/next weld:

The edited weld will overwrite the original program if the

same Weld Number is selected. To create a new program,

select an unused program number.

To scale a weld:

Welds may be edited by scaling current or travel speed

up/down by a percentage of programmed speed. This will

scale programmed values in all passes and levels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 TIG Orbital System 300 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kemppi A7 TIG Orbital System 300 Manual

Product: