686369

Kemppi A7 MIG Welder 350 Manual

39
Zoom out
Zoom in
Previous page
1/66
Next page
39
A7 MIG Welder© Kemppi Oy 2018 1804
INTEGRATION GUIDE
6.1.3 FineTuning
This 16-bit function controls the ne tuning of the synergic
voltage for all processes except the MIG process. For the
MIG process the Voltage value is used instead. The value
is given in scaled or non-scaled mode, depending on the
user setup. The ne tuning is scaled using the voltage
scaling value.
In non-scaled mode:
• The minimum setup value is 0 (-9.0).
• The maximum setup value is 180 (9.0).
• The minimum technical step is 1 (0.1).
• The minimum signicant step is 5 (0.5).
In scaled mode:
• The minimum setup value is 0 (-9.0).
• The maximum setup value is the voltage scaling
value, which is interpreted as 9.0.
• The minimum step is 1. The ne tuning is
calculated from the setup value by means of the
value scaling formula.
The value has an eect only when the OnlineControl
signal is set (1), and it overrides the corresponding memory
channel value. If the OnlineControl signal is cleared (0), the
ne tuning from the active memory channel is used.
6.1.4 Dynamics
This 8-bit function controls the dynamics of the synergic
curve for all processes except WiseRoot+. The root process
has no dynamic control. Setting this value has no eect
when the WiseRoot+ process is used.
• The minimum setup value is 0 (-9).
• The maximum setup value is 18 (9).
• The minimum step is 1.
The value has an eect only when the OnlineControl
bit is set (1), and it overrides the corresponding memory
channel value. If the OnlineControl bit is cleared (0), the
dynamics value from the active memory channel is used.
6.1.5 MemoryChannel
This 8-bit function controls the active memory channel.
The system automatically brings all parameters from the
memory channel into use, including those for the welding
process, welding parameters, and welding functions.
There are up to 200 memory channels available in the
system. They are numbered 0 to 199. The memory channel
can be changed during welding.
• The minimum setup value is 0.
• The maximum setup value is 199. All values
above that are automatically interpreted as 199.
• The minimum step is 1.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Welder 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Welder 350 in the language / languages: English as an attachment in your email.

The manual is 5,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info