686368

Kemppi A7 MIG Power Source 450 Manual

34
Zoom out
Zoom in
Previous page
1/67
Next page
34
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
In the Gas sensor settings menu you can
• select Gas sensor ON and OFF.
• adjust Gas ow sensing level by using the slider bar.
• select Gas type from the drop-down menu (for an integrated gas sensor).
OR
• select Argon, Carbon Dioxide, Nitrogen, Oxygen, Hydrogen and Helium
concentration in a Gas mixture (for a bus-controlled gas sensor).
In the General robot settings menu you can
• select Interface mode for the digital robot interface in the selection box.
• adjust Voltage scaling by using the slider bar.
• adjust Wire feed speed scaling by using the slider bar.
• adjust Current scaling by using the slider bar.
• select Simulation mode by OFF, ON or SELECT AT ROBOT by clicking on the
buttons.
• select Gun type from the drop-down menu.
In the Touch sensor settings menu you can
• select Output voltage from the drop-down menu.
• select Touch tool WELDING WIRE, GAS NOZZLE or SELECT AT ROBOT by clicking
on the buttons.
• select Fast output polarity LOW-ACTIVE or HIGH-ACTIVE by clicking on the
buttons.
In the Collision sensor settings menu you can
• select Collision sensor ON and OFF by clicking on the buttons.
• select Switch type OPENING or CLOSING by clicking on the buttons.
• select Output polarity LOW-ACTIVE or HIGH-ACTIVE by clicking on the buttons.
In the Emergency stop settings menu you can
• select Emergency stop ON and OFF by clicking on the buttons.
• select Gate door switch ON and OFF by clicking on the buttons.
• select Switch type for the emergency stop and the gate door switch by clicking
on the buttons.
• select Line level for the emergency stop and the gate door switch by clicking on
the buttons.
In the Watchdog settings menu you can
• select Watchdog ON and OFF by clicking on the buttons.
• adjust Timeout by using the slider bar.
In the Welding system time menu you can
• select date by clicking on the date and selecting year, month and day from a
pop-up calendar.
• set time by clicking on the time and typing new time in to the eld.
• synchronize with the current system time by clicking the NOW button.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG Power Source 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG Power Source 450 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info