686407

Kemppi A5 TIG Orbital System 75 Manual

22
Zoom out
Zoom in
Previous page
1/33
Next page
22
A5 TIG Orbital System 75© Kemppi Oy 2016 1615
OPERATING MANUAL
3.6 Equipment stop
To stop weld head and controller operation at any time:
1. Press the Stop button on the weld head control
panel, or
2. Press the large red EQUIPMENT STOP button on
the controller unit. This is a locking switch that
disconnects power from the controller. The control
circuits remain powered.
The EQUIPMENT STOP button on the controller unit
needs to be released before the unit can be used.
6. To complete the installation after download, press
Equipment Stop.
7. Remove the stick.
8. To release Equipment Stop, rotate it slightly and
pull up.
The software has been updated and the A5 TIG Orbital
System 75 is ready for use.
If the weld head software is to be updated, repeat this
procedure. Start by pressing the weld head icon.
3.7 Updating software
To check for software revisions:
1. Check the version displayed on the splash screen
by pressing the Kemppi logo in the upper left
corner of the Home screen.
2. Display shows controller software revision as
well as weld head revision, if the weld head is
connected.
A
To update software:
1. Use the USB port to load new software. The weld
head does not have to be connected unless it is the
weld head software that is to be updated.
2. Press the Kemppi logo on the Home screen.
3. Press the controller icon.
4. Insert the memory stick into the USB port of the
controller unit.
5. The screen indicates that software transfer is in
progress.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A5 TIG Orbital System 75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A5 TIG Orbital System 75 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info