686376

Kemppi A3 MIG Power Source 400 Manual

13
Zoom out
Zoom in
Previous page
1/32
Next page
13
A3 MIG Welder© Kemppi Oy 2018 1826
OPERATING MANUAL
Wire feed test
When you press the Wire inch button (4), the wire feeder
engine starts feeding. The gas valve does not open, and
the power source is not activated.
The wire feed pace is 2 m/min for the rst two seconds,
and then 10 m/min.
When the button is released, the wire feeding stops. The
machine automatically goes back to the normal state af-
ter approximately 3 seconds from release of the button or
immediately when you press the ESC button.
Retrieving weld data
The weld data function allows you to return to the weld-
ing current and voltage used during the previous session,
with the weld data feature. To use the feature, press but-
tons 3 and 4 simultaneously.
Selecting the welding process
The welding process selection button (7) allows you to se-
lect the welding process you want to use. You can select
one of the following processes:
• regular MIG welding
• 1-MIG welding
• WiseThin & WiseRoot (optional)
In regular MIG welding, the wire feed speed and weld-
ing voltage are adjusted separately. Unlike the above,
the 1-MIG, WiseThin and WiseRoot processes are synergic
welding processes where the welding voltage and other
welding parameters are interconnected so that the weld-
ing power and arc length are adjusted to attain optimal
welding values.
The WiseThin and WiseRoot processes are optional
features intended for welding automation. They must
be acquired separately by licenses and are therefore not
available in all congurations.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A3 MIG Power Source 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A3 MIG Power Source 400 in the language / languages: English as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info