478053
5
Zoom out
Zoom in
Previous page
1/16
Next page
Kelvinator Refrigeration Installing your new refrigerator 5
5. If the refrigerator now rocks from one corner to the
opposite rear corner, this means that the oor is uneven;
you will need to put some packing under one of the
rear rollers. You could use thin pieces of solid material,
such as thin board, vinyl oor tiles or laminate. Place
the packing so that it will sit under one of the rear rollers
when the refrigerator is rolled into position.
6. You may now need to ne-tune the installation
by repeating Steps 3, 4 and 5.
7. When you have the appliance in its nal position,
it needs to be stabilised. Wind the stability foot down
to the oor until it just makes contact with the oor.
Lift the front of the appliance to take the weight off the
stability foot, then turn it ¼ turn further to ensure rm
contact with the oor. Whenever you need to move
the appliance, be sure to wind the foot back up so
that the appliance can roll freely and be sure to
reset it when reinstalling.
Wheneveryouneedtomovetherefrigerator,besuretowind
thefootbackupsothattherefrigeratorcanrollfreely.
8. Clean your refrigerator thoroughly following the
instructions on page 11 and wipe off any dust that
has accumulated during shipping.
9. Plug the refrigerator into the power point. Don’t use
a double adaptor. If you need to roll the refrigerator
outtogetatthepowerpoint,remembertoraisethe
stabilityfootbeforeyoudoso.
10. We recommend that you let your refrigerator run for two
to three hours before you put any food in it. This will allow
you to check that it is operating properly.
Congratulations! You have successfully installed your
new refrigerator.
caution
Keep ventilation openings, in the appliance enclosure
orinthebuilt-instructureclearofobstruction.
Adjustingdooralignment–SidebySiderefrigeratoronly
Each door is independently adjustable in the vertical
direction by turning the adjustable bolts under the hinges
using a spanner.
The doors can be adjusted up or down. Depending on
the amount of adjustment required it may be sufcient
to adjust only one door. (see Diagrams below)
Note: When the height of the rollers and adjusting bolts
are correctly adjusted the refrigerator will stand rmly on
the oor then adjust door alignment as required.
Large plastic roller nut
Front Roller
Adjusting Bolt
Stabilising
foot wound
down
side view front view
¼ turn
5


Need help? Post your question in this forum.

Forumrules
1

Forum

kelvinator-kbm4300wb

Reset search

  • Hi, help please, where does the wire rack go in the freezer, I have the 2 baskets in but for the life of me, can’t work out where the rack goes? ??
    Thanks H ???? Submitted on 10-11-2021 at 19:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kelvinator KBM4300WB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kelvinator KBM4300WB in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info