598220
33
Zoom out
Zoom in
Previous page
1/476
Next page
3
Front Panel Operation
3.1 Introduction
This section contains detailed information on front panel
operation of the Model 2001. It is organized as follows:
Covers information on
connecting the instrument to line power, warm-up period,
default conditions, and the power-up sequence.
Covers display format and messages
that may appear while using the instrument.
Describes the measurement
functions of the instrument (DC and AC voltage, DC and AC
current, 2-wire and 4-wire resistance, frequency, and
temperature) and typical test connections.
Covers both manual and autoranging
operation.
Gives details on using the relative
feature that can be used to null offsets or subtract a baseline
value from present and future readings.
Details types of trigger modes as well
as trigger sources that can be used.
Buffer, page 79: Covers use of the reading buffer
including programming buffer size and recalling data, time
stamp, and statistics information.
3.9 Filters, page 86: Covers the use of the digital filter types
that can be used to reduce reading noise.
3.10 Math, page 92: Describes the calculations that can be
performed on readings in continuous operation.
3.11 Scanning, page 94: Discusses setting up internal and
external scans, along with ratio and delta calculations.
3.12 Menu, page 105: Covers selections controlled from the
main menu, such as saving instrument setups, GPIB (IEEE-
488 bus) configuration, calibration, self-tests, limits, and the
digital I/O port.
3.2 Power-up procedure
3.2.1 Line power connections
Follow the procedure below to connect the Model 2001 to
line power and turn on the instrument.
1. The Model 2001 operates from a line voltage in the
range of 90-134V or 180-250V at a frequency of 50, 60,
or 400Hz. Check to see that the operating voltage in
your area is compatible.
CAUTION
Operating the instrument on an incor-
rect line voltage may cause damage to
the instrument, possibly voiding the
warranty.
2. Before plugging in the power cord, make sure the front
panel power switch is in the off (0) position.
3. Connect the female end of the supplied power cord to
the AC receptacle on the rear panel. Connect the other
end of the power cord to a grounded AC outlet.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keithley 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keithley 2001 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info