598220
26
Zoom out
Zoom in
Previous page
1/476
Next page
Getting Started
2-12 2001-900-01 Rev. K / August 2010
Step 4
Configure for burst of high speed readings
There are two data acquisition modes, normal and burst. The
burst reading rate is 2000 readings/sec into the buffer (plus
post-processing time of the raw readings, typically 2msec/
reading). To achieve this speed, certain tradeoffs are made
with flexibility, as listed in Table 2-5.
1. To continue the reading storage example with burst
mode selected, display the CONFIG DATA STORE
menu by pressing the CONFIG key, then the STORE
key:
CONFIG DATA STORE
BURST-MODE DATA-GROUP CONTROL
CLEAR-ALL COUNT FEED
2. Select BURST-MODE and press ENTER. After a
momentary message about clearing the buffer, the
display shows:
BURST MODE
OFF ON
3. Select ON and press ENTER. (Certain instrument
parameters are saved when burst is enabled, and are
restored when burst is disabled. See paragraph 3.8.1 for
further details on burst mode.)
q~ÄäÉ=OJQ
Multiple displays for recalled readings
+00.00000 VDC
Rdg#+00000 @Time=+000.000000
sec
NEXT PREV
Normal stored reading.
Reading number and time-stamp.
+00.00000 VDC
MAX=+0.000000e+00 at RDG# +00000
NEXT PREV
Maximum value of stored readings.
+00.00000 VDC
MIN=+0.000000e+00 at RDG# +00000
NEXT PREV
Minimum value of stored readings.
+00.00000 VDC
AVG=+0.0000e+00 SDEV=+0.0000e+00
NEXT PREV
Average and standard deviation.
PRINT BUFFER DATA
Press ENTER to start printing.
NEXT PREV
Prompt to dump readings to a printer.
Note: Press the NEXT and PREV DISPLAY keys to scroll through the multiple displays (with wraparound.)
q~ÄäÉ=OJR
Burst mode availability
DC voltage
AC voltage
DC current
AC current
2-wire resistance
4-wire resistance
Frequency
Temperature
Range
Autozero
Speed
Filter
Resolution
Multiple displays
Data grouping
Delay
Normal (no peak spikes)
Normal RMS or average
Normal (no in-circuit)
RMS or average
Normal (no offset compensation)
Not available
Not available
Not available
Fixed
Disabled
FAST (0.01 PLC)
Repeat acts like moving.
4.5 digits
Disabled
Compact (reading and reading
number)
As set.
Notes:
1. The measurement display is not updated during burst.
2. A math operation slows post-processing time.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keithley 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keithley 2001 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info