598226
119
Zoom out
Zoom in
Previous page
1/256
Next page
*CLS — Clear Status Clear status registers and error queue
Description
Use the *CLS command to clear (reset to 0) the bits of the following registers in the Model
2000:
Standard Event Register
Operation Even Register
Error Queue
Measurement Event Register
Questionable Event Register
This command also forces the instrument into the operation complete command idle state
and operation complete query idle state.
*ESE <NRf> — Event Enable Program the standard event enable register
*ESE? — Event Enable Query Read the standard event register
Parameters
<NRf> = 0 Clear register
1Set OPC (B0)
4 Set QYE (B2)
8 Set DDE (B3)
16 Set EXE (B4)
32 Set CME (B5)
64 Set URQ (B6)
128 Set PON (B7)
255 Set all bits
Description
Use the *ESE command to program the Standard Event Enable Register. This command
is sent with the decimal equivalent of the binary value that determines the desired state (0
or 1) of the bits in the register. This register is cleared on power-up.
This register is used as a mask for the Standard Event Register. When a standard event
is masked, the occurrence of that event will not set the Event Summary Bit (ESB) in the Sta
-
tus Byte Register. Conversely, when a standard event is unmasked (enabled), the occur-
rence of that event sets the ESB bit. For information on the Standard Event Register and
descriptions of the standard event bits see the next section.
A cleared bit (0) in the enabled register prevents (masks) the ESB bit in the Status Byte
Register from setting when the corresponding standard event occurs. A set bit (1) in the en
-
able register allows (enables) the ESB bit to set when the corresponding standard event oc-
curs.
The Standard Event Enable Register is shown in Figure 4-13 and includes the decimal
weight of each bit. The sum of the decimal weights of the bits that you wish to be set is the
2000-900 (J - Aug 2010) BOOK.fm Page 40 Wednesday, October 12, 2011 12:29 PM
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keithley 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keithley 2000 in the language / languages: English as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Keithley 2000

Keithley 2000 User Manual - German - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info