738046

Keiser 3020XP Functional Trainer Manual

14
Zoom out
Zoom in
Previous page
1/20
Next page
14
OPERATION MANUAL
FUNCTIONAL TRAINER
MAINTENANCE
PREVENTATIVE MAINTENANCE SCHEDULE
Daily
• Wipe down the external body/parts using a moist cloth and a mild detergent (neutral,
non-caustic). Wipe dry the equipment.
• Check that parts most susceptible to wear are not damaged or broken:
– Pulleys, Cable, Cable Link, Handle, Thumb Buttons, and Adjustment Plunger.
• Check to ensure that the Functional Trainer is in safe and proper working order:
– The Functional Trainer is securely fastened to the base (oor mount or free-
standing). There should be no movement of the unit in any direction during use.
– Press the “+” and then “-” Thumb Buttons a few times to ensure air cycles
through and that the Power Display powers on.
– Cable travels freely and smoothly without binding.
Monthly
• Inspect Air Line for kinks, tears, or breaks.
• Clean the external body/parts thoroughly, targeting areas that come in contact with
sweat, using a moist cloth and a mild detergent (neutral, non-caustic). Wipe dry the
equipment.
Quarterly
• Check mount hardware (wedge anchors) and externally visible screws are fastened with
no looseness. There should be no movement of the unit in any direction during use.
Annually and
other Required
Maintenance
• For complete instructions, see page 16 “Annual Maintenance.”
• Battery Replacement. The low battery signal (“Lo-bA”) will appear on the Power Display
when it is time to replace the batteries. Refer to page 15 “Battery Replacement” for
complete instructions.
For establishments with multiple Functional Trainer machines, replacement of all
Power Display batteries at the same time is recommended.
NOTE: Your Keiser Air Compressor (not included with your Functional Trainer) requires
basic annual maintenance. For complete Keiser Air Compressor maintenance instructions,
download the user manual at keiser.com/support (search: Air Compressor manuals).
Weekly
• Hand wash the strap material of accessories using mild detergent (neutral, non-caustic)
and water. Air dry only.
Contact Keiser Customer Support for replacement parts order, or for any matters regarding the safe operation of your
Functional Trainer (see back cover for contact information).
IMPORTANT: Do not use household or industrial cleaners as they contain caustic chemicals that can destroy the paint
nish and cause corrosion. Use only mild detergent (neutral, non-caustic) to clean. A quat disinfectant cleaner (quaternary
ammonium chloride) with an anti-microbial agent is acceptable.
CAUTION: THE HIGHEST LEVEL OF EQUIPMENT SAFETY CAN ONLY BE ENSURED IF EQUIPMENT IS
REGULARLY INSPECTED FOR DAMAGE AND WEAR. Always check that the Functional Trainer is securely
fastened to the Free-standing or Floor Mounted Base before use (no tilt, lean, or any other movement of the
unit should be detected during use). Immediately replace damaged, worn, or broken parts. Do not use the
Functional Trainer until all repairs have been completed and tested by a Keiser-certied technician.
CAUTION: SERVICE AND REPAIR SHALL ONLY BE PERFORMED BY KEISER-CERTIFIED TECHNICIANS.
Failure to follow these instructions can result in serious injury.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser 3020XP Functional Trainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser 3020XP Functional Trainer in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info