738047
16
Zoom out
Zoom in
Previous page
1/20
Next page
OPERATION MANUAL
PERFORMANCE TRAINER
16
Do not operate the equipment during the annual maintenance procedure. The following maintenance is recommended annually
or at the time batteries are replaced:
1. Clean:
Wipe any accumulated dust on the interior and exterior of the Performance Trainer using a clean cloth.
2. Visual inspection of Cables (external and internal):
Ensure that the Cables have no tears/fraying.
3. Replace Mufer if discoloration is present:
Tool required: 11/16 inch (17 mm) Combination Wrench.
4. Lubricate Cylinder Rod:
Wipe the cylinder rod clean and coat lightly with clean, SAE 30 motor oil, or with a silicon-based spray.
5. Replace Air Filter if element is dirty (element turns a bright pink or red color):
Tools required: Small Needle Nose Pliers, Cutter Tool (to cut off ared end of tubes).
1
2
3
4
5
ANNUAL MAINTENANCE
Figure 11. Annual Maintenance
Contact Keiser Customer Support for replacement part(s) order, or for any matters regarding the safe operation of your
Performance Trainer (see back cover for contact information).
To open the Performance Trainer, remove
the ve Phillips Screws along the left side
using a #3 Phillips screwdriver.
3
4
5
1
2
WARNING: HIGH-PRESSURE
AIR. DISCONNECT THE EQUIPMENT
FROM THE AIR SUPPLY AND
RELEASE ALL THE AIR IN THE
EQUIPMENT (“ ” THUMB BUTTON)
BEFORE PERFORMING ROUTINE
MAINTENANCE.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser 3010XP Performance Trainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser 3010XP Performance Trainer in the language / languages: English as an attachment in your email.

The manual is 11,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info