Remove the back cover of the device.
Hold the device with the front facing downwards.
Remove the battery
Slot the micro SD card into the device as shown below.
Replace the battery.
Replace the battery cover until it clicks into place.
2.2 POWERING ON/OFF THE DEVICE
Turning On the Device
After installing the SIM card and charging the battery, you are now ready to turn on
your device.
Press and hold the Power Key to turn on the device.
Turning Off the Device
Press and hold the Power Key for 3 seconds to enter the function screen,
press the right navigator key to select power off.
3.1 CALLING
Making Calls
If the icon network strength icon is visible in the information bar at the top of the
screen, then you can make or receive calls. To make a call, follow the steps below:
Direct dial
In standby mode, press the corresponding numeric keys to enter the phone
number that you want to dial, including necessary area codes. Short Press the
Right soft key [Clear] to delete.
International call
To make an international call, long press 0 key until the prefix symbol "＋" of
international call displays in screen.
Dialing from contact list
Enter the Phonebook via the menu, use the Up/Down Navigator keys to scroll
to the desired contact, or press the first letter of the name of the desired
contact for quick search.
Dialing from call history
Enter the Call centre (press the Green key from standby or via the menu), use
the Up/Down navigator keys to scroll to the desired contact, press the green
key can direct dial.
Answer/Reject an Incoming Call
When you receive an incoming call, details of the contact name/number are
displayed.
Press the call key or left soft key to answer the incoming call.
Press the power key once to reject the call.
Other Options during the call
To put a call on hold
If you are on a call you can put the call on hold by selecting Options - Hold.
In call options menu:-
Swap –Switch between active calls
Conference – Multi-call options. The availability of this option depends on your service
provider.
End single call - End the current call.
End all calls- End all active calls
New call – Launches the dialer and a new call can be initiated
Phonebook – Launched phonebook interface
Call history –Launched call history list
Messaging – Launches messaging menu
Sound recorder -Record the current call. Note- Recording of the call, in some countries
is illegal. Therefore, when you record calls, should seek prior approval from the other
party.
Mute – Open the function, the quiet do not send local voice.
Volume – Press the navigator to adjust the call volume.
3.2 MESSAGING
Your device is capable of sending and receiving of SMS (Short Message Service)
and MMS (Multimedia Message Service).
Creating an SMS
From the main menu, select ‘SMS’ – ‘Write message’
Select ‘Options’ – ‘Send ’ to enter a number or select a recipient contact
Once recipient is specified, select ‘Options’ – ‘Send’ to send the message.
Creating an MMS
Your device comes preloaded with some MMS settings. Additional settings can be
added by accessing: –
