771572
43
Zoom out
Zoom in
Previous page
1/84
Next page
Site location
The site location must be free from any corrosive elements in
the atmosphere such as sulfur, fluorine, and chlorine.
These elements are found in aerosol sprays, detergents, bleaches,
cleaning solvents, air fresheners, paint, and varnish removers,
refrigerants, and many other commercial and household products.
An excessive dust and lint may affect the operation of the unit
and require more frequent cleaning.
Refrigerant circuit
Visually check the refrigerating circuit: the presence of oil stains
can mean leakage (caused, for example, by transport, handling or
other).
Use the pressure taps only if you need to load or unload the
refrigerant circuit.
Hydraulic circuit
Before realizing the unit connection make sure that the hydraulic
system has been cleaned up and the clearing water has been
drained .
Check that the water circuit has been charged and pressurised .
Check that the cut-off valves on the circuit are in the "OPEN"
position.
Check that no air is present in the circuit, if required, evacuate
using the air bleeding valve placed at the system's high points.
Aeraulic system
Verify that:
the rooms are clean (free from dirt)
ducting are completed, connected and without obstructions
Electrical circuit
Verify that the unit is connected to the ground plant .
Check tightening of the conductors: the vibrations caused by
handling and transport might cause loosing .
Feed the unit by closing the sectioning device, but leave it on OFF
Check the voltage and frequency net values which must be within the
limits:
220/240V +/- 10%
50 Hz +/- 1%
The operating out of the limits can cause malfunctions damages
and makes decay the warranty.
Post Installation Review Yes / No
1 Understand how to use the User Interface Module to set the various modes and functions.
2 Periodically check of the condensate drain pan and lines.
3
IMPORTANT: Water coming from the plastic shroud is an indicator that both condensation drain lines may be
blocked.
Immediate action is required.
4 To maintain optimal operation check, remove and clean the air filter.
9 START-UP
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Solar Compak KHPA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Solar Compak KHPA2 in the language / languages: English as an attachment in your email.

The manual is 9.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info