771410
21
Zoom out
Zoom in
Previous page
1/41
Next page
Indoor
Wall
Outdoor
Correct orientation of Mounting Plate
Page 21
Step 3: Drill wall hole for connective piping
1. Determine the location of the wall hole based on the
position of the mounting plate. Refer to Mounting
Plate Dimensions.
2. Using a 65mm or 90mm (depending on models) core
drill, drill a hole in the wall. Make sure that the hole is
drilled at a slight downward angle, so that the outdoor
end of the hole is lower than the indoor end by about
5mm to 7mm. This will ensure proper water drainage.
NOTE: When the gas side connective pipe is Ø16mmor more,
the wall hole should be 90mm.
3. Place the protective wall cuff in the hole. This protects
the edges of the hole and will help seal it when you finish
the installation process.
CAUTION
When drilling the wall hole, make sure to avoid wires,
plumbing, and other sensitive components.
MOUNTING PLATE DIMENSIONS
Different models have different mounting plates. For
the convenience of installation, there are bubble level,
carved dimensions on the mounting plate. Please install
the plate and drill wall hole according to the information
of the mounting plate. See the figures below.
Unit: mm(inch)
CAUTION: The Bubble level on the mouting plate can't be
removed. If it is broken, make sure to clean up the leaking
liquid.
Horizontal direction ruler
Vertical direction
ruler
Indoor unit outline
Indoor unit outline
Indoor unit outline
Model B
Model C
pipe hole pipe hole
pipe hole pipe hole
pipe hole pipe hole
Model A
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Prodigy Pro Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Prodigy Pro Series in the language / languages: English as an attachment in your email.

The manual is 4.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Prodigy Pro Series

Kaysun Prodigy Pro Series User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info