The unit is supplied with plugged direct expansion coil: to ensure its tightness during storage and transport, inside it is loaded nitrogen gas at
a higher pressure than atmospheric.
1)First loosen the FLARE 1/4 ”union (1) and carry out the leak test, checking that a clear noise is heard due to the outflow of pressurized
nitrogen coming out of the pipe.
2)Loosen the 1/2 "FLARE pipe union (2) and remove the rubber cap
3)Prepare the pipes to be connected following the procedure:
Cut the copper tube to the required length with a tube cutter. It is•recommended to cut approx. 30 – 50 cm longer than the tubing
length you estimate.
Remove burrs at each end of the cop-•per tubing with a tube reamer or file.
This process is important and should be
done carefully to make a good flare. Be
sure to keep any contaminants (moistu-
re, dirt, metal filings, etc.) from entering
the tubing.
Remove the flare nut from the unit and be sure to mount it on the copper tube.•
Make a flare at the end of the copper tube with a flare tool. A good flare should•have the following characteristics:
-inside surface is glossy and smooth
-edge is smooth
-tapered sides are of uniform length
Apply a sealing cap or water-proof tape to prevent dust or water from entering the•tubes before they are used.
Be sure to apply refrigerant lubricant (ether oil) to the inside of the flare nut before•making piping connections. This is effective for reducing gas leaks.
For proper connection, align the union tube and flare tube straight with each other,•then screw on the flare nut lightly at first to obtain a smooth match.
Adjust the shape of the liquid tube using a tube bender at the installation site and•connect it to the liquid tubing side valve using a flare.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kaysun KRE-500DX1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kaysun KRE-500DX1 in the language / languages: English as an attachment in your email.
The manual is 2.81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
