725796
15
Zoom out
Zoom in
Previous page
1/20
Next page
14
Operation
Operation Instructions
COOL operation
- Press the “MODE” button until the “COOL” indicator
light comes on.
- Press the ADJUST buttons “+” or “-” to select your
desired room temperature. The temperature can be
set within a range of 17ºC~30ºC/62ºF~86ºF (or 88ºF).
- Press the “FAN SPEED” button to choose the fan
speed.
HEAT operation (cooling only models without)
- Press the “MODE” button until the “HEAT” indicator
light comes on.
- Press the ADJUST buttons “+” or “-” to select your
desired room temperature. The temperature can be
set within a range of 17ºC~30ºC/62ºF~86ºF (or 88ºF).
- Press the “FAN SPEED” button to choose the fan
speed. For some models, the fan speed can not be
adjusted under HEAT mode.
DRY operation
- Press the “MODE” button until the “DRY” indicator
light comes on.
- Under this mode, you cannot selectc a fan speed or
adjust the temperature. The fan motor operates at
LOW speed.
- Keep the windows and doors closed for the best de-
humidifying effect.
- Do not put the duct to window.
AUTO operation
- When you set the air conditioner in AUTO mode, it
will automatically select cooling, heating (cooling only
models without), or fan only operation depending on
what temperature you have selected and the room
temperature.
- The air conditioner will control room temperature au-
tomatically round the temperature point set by you.
- Under AUTO mode, both the AUTO mode and the
actual operation mode indicator lights illuminate for
some models.
NOTE: Under AUTO mode, both the AUTO mode and
the actual operation mode indicator lights illuminate for
some models.
FAN operation
- Press the “MODE” button until the “FAN” indicator li-
ght comes on.
- Press the “FAN SPEED” button to choose the fan
speed. The temperature can not be adjusted.
- Do not put the duct to window.
TIMER operation
- When the unit is on, press the Timer button will initia-
te the Auto-off stop program, the TIMER OFF indica-
tor light illuminated. Press the UP or DOWN button
to select the desired time. Press the TIMER button
again within 5 seconds, the Auto-on start program is
initiated. And the TIMER ON indicator light illumina-
ted. Press the up or down button to select the desired
Auto-on start time.
- When the unit is off, press the Timer button to initiate
the Auto-on start program, press it again within 5 se-
conds will initiate the Auto-off stop program.
- Press or hold the UP or DOWN button to change the
Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
- The system will automatically revert back to display
the previous temperature setting if there is no opera-
tion in a 5 seconds period.
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/Stop
timer program.
SLEEP(EXO) operation
- Press this button, the selected temperature will in-
crease (cooling) or decrease (heating) by 1ºC/2ºF (or
1ºF) 30 minutes. The temperature will then increase
(cooling) or decrease (heating) by another 1ºC/2ºF
(or 1ºF) after an additional 30 minutes. This new tem-
perature will be maintained for 7 hours before it retur-
ns to the originally selected temperature. This ends
the Sleep/Eco mode the unit will continue to operate
as originally programmed.
NOTE: This feature is unavailable under FAN or DRY
mode.
Other features
FOLLOW ME/TEMP SENSING feature (optional)
NOTE: This feature can be activated from the remote
control ONLY. The remote control serves as a remote
thermostat allowing for the precise temperature control
at its location. To activate the Follow Me/Temp Sensing
feature, point the remote control towards the unit and
press the Follow Me/Temp Sensing button again. If the
unit does not receive the Follow Me/Temp Sensing sig-
nal during any 7 minutes interval, the unit will exit the
Follow Me/Temp Sensing mode.
NOTE: This feature is unavailable under FAN or DRY
mode.
AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut,
it will restart with the previous function setting automa-
tically when the power resumes.
AIR FLOW DIRECTION ADJUSTMENT
The louver can be adjusted automatically, Adjust the air
flow direction automatically:
- When the Power is ON, the louver opens fully.
- Press the SWING button on the panel or remote con-
troller to initiate the Auto swing feature. The louver will
swing up and down automatically.
- Please do no adjust the louver manually.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KP-35 HP10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KP-35 HP10 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KP-35 HP10

Kaysun KP-35 HP10 User Manual - German - 20 pages

Kaysun KP-35 HP10 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info