771479

Kaysun KHPI-BI-16VR2XL Manual

20
Zoom out
Zoom in
Previous page
1/44
Next page
NOTE
During filling, it might not be possible to remove all air in the system. Remaining air will be removed through the automatic air
purge valve during the first operating hours of the system. Topping up the water afterwards might be required.
The water pressure indicated on the manometer will vary depending on the water temperature (higher pressure at higher
water temperature). However, at all times water pressure should remain above 0.5 bar to avoid air entering the circuit. The
unit might drain-off too much water through the pressure relief valve.
Water quality should be complied with EN 98/83 EC Directives.
Detailed water quality condition can be found in EN 98/83 EC Directives.
Connect the water supply to the filling valve and open the valve.
Make sure all the automatic air purge valves are open (at least 2 turns).
Filling with water until the manometer(field supply) indicates a pressure of approximately 2.0 bar. Remove air in the circuit as
much as possible using the automatic air purge valves.
Open the automatic air purge
valve, turn counterclockwise at
least 2 full turns to release air
from the system.
6.8 Filling water
6.8.1 Filling the water circuit
6.8.2 Filling the domestic hot water tank
1 Open every hot water tap in turn to purge air from the pipes of the system.
2 Open the cold water supply valve.
3 Close all water taps after all air is purged.
4 Check for water leakage.
5 Manually operate the field-installed pressure relief valve to ensure a free water flow through the discharge pipe.
NOTE
In most applications this minimum water volume will be satisfactory.
In critical processes or in rooms with a high heat load though, extra water might be required.
When circulation in each space heating loop is controlled by remotely controlled valves, it is important that this minimum
water volume is kept even if all the valves are closed.
if each space heating (cooling loop is controlled by the valves, the overpressure bypass valve(field supply) should be
mounted between the heating(cooling) loops.
Fig.6-8
17
●
Cold water inlet pressure should be less than 1.0MPa. Expansion vessel and safety valve（field supply，protection pressure
is 1.0MPa）must be installed.
●
Warning and Water Quality Directive and Groundwater:This product is designed to comply with the European Water Quality
Directive 98/83/EC amended by 2015/1787/EU. The lifespan of the product is not guaranteed in the case of the use of
groundwater, such as spring water or well water, the use of tap water when salt or other impurities are contained, nor in
areas of acidic water quality. Maintenance and warranty costs related to these cases are the customer’s responsibility.
CAUTION
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KHPI-BI-16VR2XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KHPI-BI-16VR2XL in the language / languages: English as an attachment in your email.

The manual is 38.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KHPI-BI-16VR2XL

Kaysun KHPI-BI-16VR2XL User Manual - German - 44 pages

Kaysun KHPI-BI-16VR2XL User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info