771549
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
(10) Air filter cleaning reminding function
The wired controller records the total running time of the indoor unit, when the accumulated
running time reaches the pre-set value, air filter cleaning reminding icon will be lighted up, to
remind that the air filter of the indoor unit needs to be cleaned. Long press left button for 3
seconds, and clear the reminding icon and the wired controller will re-accumulate the total
running time of the indoor unit.
Notes: The default setting value of reminding function is 2500 hours, and it can change to be 1250 hours, 5000
hours or 10000 hours. The setting methods please refer to the installation manual.
(11)Swing function
If the indoor unit supports swing function, press the right button to adjust the air outlet direction of
the indoor unit. Long press this button for 3 seconds can turn on or turn off the auto-swing
function. When the auto-swing function is turned on, the swing icon will be lighted up.
(12)Follow me function
When the system is running and the operating mode is AUTO. COOL or HEAT, press the left
button will activate the Follow Me function. Press left button again will cancel follow me function.
When the operating mode is changed, and then will cancel this function as well. When the Follow
Me function is activated, the icon will be light up, and the wired controller will display room
temperature read from the local sensor, and transmit the temperature value to the indoor unit
every 3 minutes.
(13) Setting addresses
§ Press the Temp. UP and DOWN button simultaneously for more than 8 seconds, then the
controller gets into address setting mode.
§ In the address setting mode, there are 2 main functions:
§ Querying address: Press MODE button, the corresponding indoor unit will display its
address.
§ Setting address: Use the UP and DOWN buttons to choose an address you want. Then
press the FAN button to set the indoor unit's address. The corresponding indoor unit will
display the new address and record it. After about 4 seconds, this displaying will fade out
and indoor units turn to normal display mode.
§ After setting addresses, users can press the Quiet/OK button can exit the address setting
mode.
§ After each setting address and enter the query / set mode again, it will display the last set of
address, but if re-power, this address will be cleared.
§ In the address setting mode, wired controller does not respond to any command from remote
controller.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KCT-02.1 SR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KCT-02.1 SR in the language / languages: English as an attachment in your email.

The manual is 0.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KCT-02.1 SR

Kaysun KCT-02.1 SR User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info