771549
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
(5)Temperature setting
Under AUTO, COOL, DRY, HEAT modes, press the Temp adjust Up/Down buttons to set the
temperature, the adjusting range is 17~30 (or 62~88). The setting temperature cannot be
adjusted under FAN mode.
(6)Timer on and Timer off setting
Press the timer/clock setting button, then enter into the timer on setting status, and the screen will
display timer icon and .
You can press Temperature setting buttons to adjust the time. When the time setting is less than
10 hours, each press the Temp setting buttons will increase or decrease 0.5 hour. When the timer
setting is more than 10 hours, each press Temp setting buttons will increase or decrease 1 hour,
the maximum timer setting is 24 hours. After finish adjusting the time on setting, press the
26/OK button or wait for 5 seconds to confirm and exit the time on setting.
Notes: If the wired remote controller has been set timer on/ off, press the ON/OFF button to turn on/ turn off the
unit then the timer will be canceled simultaneously.
(7) Clock setting
Long press the timer/clock setting button for 3 seconds, and then enter into the clock setting
status. The hour position of the clock will flash, and can press Temp setting buttons to adjust the
hour value.
After finish the hour setting, press left button or right button to switch to minute position setting,
then the minute position will flash, press Temp setting buttons to adjust the minute value. After
finish the clock setting, press the button or wait for 5seconds to confirm and exit the setting state.
(8)Quiet/OK button
Under the cooling, heating and auto mode, when operate the quiet mode, it can reduce the
running noise through setting the fan speed to low. This will help you bring a quieter environment.
Under AUTO, DRY mode, the fan speed is auto and the Quiet /OK button doesn’t work.
(9) Wired controller locking
Press the temperature adjusting UP and DOWN buttons simultaneously, the wired controller
enters into locking state, and the locking icon will be lighted up. Under the locking state, the wired
controller will not respond to buttons by pressing and the control instruction from the wireless
remote controller. Simultaneously press temperature adjusting buttons again will cancel the
locking state.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KCT-02.1 SR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KCT-02.1 SR in the language / languages: English as an attachment in your email.

The manual is 0.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun KCT-02.1 SR

Kaysun KCT-02.1 SR User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info