771521
49
Zoom out
Zoom in
Previous page
1/80
Next page
45
* In addition to the LED display, the fault signal LED is continuously illuminated in red.
Code no. Fault Cause Remedy
E04
Mains undervoltage Power supply too low on mains
side
Check mains voltage.
E05
Power supply too high on
mains side
Mains overvoltage Check mains voltage.
E09
Turbine operation The pump is driven in reverse
(the fluid flows through the
pump from the pressure to the
suction side)
Check flow, install non-return
valves if necessary
E10
Blocking Request customer service
Request customer service
Request customer service
Request customer service
Request customer service
The rotor is blocked
E21
*
Overload Sluggish motor
E23
Short-circuit Motor current too high
E25
Contacting/winding Motor winding defective
E30
Module overheated Module interior too warm
Improve room ventilation, check
operating conditions, request
customer service, if necessary
Improve room ventilation, check
operating conditions, request
customer service, if necessary
E31
Overheated power
section
Ambient temperature too high
E36
Electronic faults Electronics defective
The warning signal is indicated by the LED display.
The fault signal LED and the SSM relay do not respond.
The pump continues to run with limited output.
The indicated faulty operating status must not occur for a prolonged period. The cause must be eliminated.
If the operating fault cannot be remedied, please consult a specialist technician or the nearest customer service
location or representative.
In order to ensure the service life of the pump, it is recommended that the unit run at least once every 2 weeks
(ensure that the pump is running) or keep it powered on for a long time (in the power-on standby state, the unit will
run the pump for 1 minutes every 24 hours)
NOTE
* See also fault signal E21.
Code no. Fault Cause Remedy
E07 Generator operation Pump hydraulics have fluid
running through them.
Check the system
E11 Dry running Air in the pump Check the water volume/
pressure
E21
*
Overload
Sluggish motor, pump is oper-
ated outside of its specifica-
tions (e.g. high module
temperature). The speed is
lower than during normal
operation.
Check the ambient conditions
2) Warning signals
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Aquantia PRO Monobloc - KHP-MO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Aquantia PRO Monobloc - KHP-MO in the language / languages: English as an attachment in your email.

The manual is 27.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Aquantia PRO Monobloc - KHP-MO

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - German - 88 pages

Kaysun Aquantia PRO Monobloc - KHP-MO User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info