772970
63
Zoom out
Zoom in
Previous page
1/68
Next page
EN
63
2. To save and go to the next setting (unit
selection), press the “i” button.
FIG. 15
Selection of km or miles (U)
Selection of linear unit. 1 is miles and 2 is km.
The default setting is 2.
1. To switch unit, press the + or button and
press “i” button to save.
2. Tap the “i” button to save the linear unit
and select resetting the trip meter on the
display.
3. Press the “i” button for 2 seconds to save
the linear unit and exit the drive settings
menu.
FIG. 16
FIG. 17
Setting the time (Hour)
1. Press the + or button to select Hour-Y or
Hour-n. The default setting is Hour-n.
2. If Hour-n has been selected, press thei
button to conrm and switch to resetting
the trip meter.
3. If Hour-Y has been selected, press thei
button to conrm and switch to the menu
to reset the time. Use the + and buttons
to set the time. Press the “i” button for 2
seconds to save the set time and exit the
drive settings menu.
FIG. 18
General parameter settings
1. Press both the + and buttons for 2
seconds to go to the menu to set general
parameters.
2. Press the and “i” buttons at the same
time for 2 seconds to set the wheel
diameter.
Setting the wheel diameter (Ld)
Setting the wheel diameter. The values that can
be set are 16, 18, 20, 22, 24, 26, 700C and 28.
1. To change the setting, press the + and
button until the required value is shown.
2. To save and go to the next setting (speed
limit), press the “i” button. The default
setting is 26 inches.
FIG. 19
Setting the speed limit (LS)
Setting the top speed limit for power
assistance. The power assistance switches o
when the bike goes faster than the set speed
limit. The adjustable range is from 12 to 25
km/h.
1. To change the setting, press the + or
button until the required value is shown.
2. To save the changed setting and exit the
menu for general parameters, press the
i” button for 2 seconds.
FIG. 20
Personal parameter settings
Personal parameter settings can be made
to adapt the system to user requirements.
There are personal parameter settings for
the following 8 functions: battery indicator,
power assistance level, overcurrent protection,
assistance sensor, speed sensor, throttle,
system settings and password protection.
1. Press both the + and buttons for 2
seconds, release and then press again
for 2 seconds to go to the menu to set
personal parameters.
2. Browse to the required settings menu
All manuals and user guides at all-guides.com
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kayoba-Jula 005026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kayoba-Jula 005026 in the language / languages: English, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 3.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info