772970
62
Zoom out
Zoom in
Previous page
1/68
Next page
EN
62
The power assistance level is shown on
the display and can be adjusted with the
buttons on the control unit. The assistance
level can be adjusted at any time, in the
default conguration from 0 to 5, even when
cycling. The system is passive and provides
no assistance at level 0. From level 1 the
system gradually assists up to the maximum
assistance level 5.
1. Press the + button repeatedly to step up
the power assistance to the required level,
or the button to reduce.
2. The set power assistance level is shown on
the display. The default setting is level 1.
FIG. 9
Battery indicator
The battery charge level is indicated with ve
bars in a battery symbol. Each bar corresponds
to about 20% of the batterys total capacity.
When the battery is completely at the battery
symbol ashes to remind you that it needs
charging immediately.
FIG. 10
Motor power indicator
The motor power is indicated with a symbol on
display.
FIG. 11
Indicator for USB connection (option)
External devices can be supplied with power
via the USB port in the display. Connect a
smartphone or other similar device to the
USB port with a suitable USB cable. (Charging
voltage 5 V, charging current max 1 A.)
FIG. 12
Error code display
The components in the power assistance
system are monitored continuously and
automatically. An error code is shown in the
display eld for text messages if a fault is
detected.
FIG. 13
Error
code
Signicance
21 Over current/abnormal current
22 Throttle fault
23 Motor failure
24 Signal from motors Hall element
defective/abnormal
25 Brake fault
30 Communication fault
Drive settings
Press both the + and buttons for 2 seconds to
go to the drive settings menu. All settings must
be done when the bike is stationary.
Resetting of trip meter (tC)
Resetting of trip meter.
1. To reset the trip meter, press the + or
button until tC-Y is displayed.
2. To save the reset trip meter value and go
to the next setting (backlight brightness),
press the “i” button.
FIG. 14
Setting the display brightness (bL)
The backlight is adjustable from level 1 (low) to
level 3 (high). The default setting is level 1.
1. To change the setting, press the + or
button.
All manuals and user guides at all-guides.com
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kayoba-Jula 005026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kayoba-Jula 005026 in the language / languages: English, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 3.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info