63824
59
Zoom out
Zoom in
Previous page
1/92
Next page
59
Satellite
Select the satellite to be scanned, using the

buttons. Make sure your reception system
is aligned to the selected satellite. You can scan only one satellite at a time. If you have connected a
multi-feed reception system (e.g. reception of ASTRA 19.2° East and HOTBIRD 13° East), you
must repeat this procedure once for each satellite. You can however start the rst installation again,
in the course of which a channel scan of all the satellites you selected is performed.
Press the
button to move to the next selection item.
Channel scan mode
Use the

buttons to select whether you wish to scan “free & scrambled”, “only free” or “only scrambled”
channels.
To view encrypted channels you need the appropriate CA (Conditional Access) module and a valid
smart card together with a valid subscription to the respective Pay-TV provider.
Press the
button to move to the next selection item.
Network scan
Use the

buttons (On/Off) to select whether a network scan should be performed. If you set the
network scan to “Off”, only the factory stored transponders of the satellites you previously selected will be
scanned for new as yet unlisted channels.
If you set the network scan to “On”, the transponder network enables additional transponders that have not
yet been stored to be located. They are then stored and scanned for new channels in the same way as the
existing transponders.
When you have made your settings, use the

buttons to select “Start Search” and press the
button
to start scanning. You can cancel the scan at any time by pressing the
button. During the scan you will
see the following message (example):
TV channels found
Radio channels
found
Progression bar
Satellite with the
transponder
currently being
scanned
CHANNEL SEARCH (CHANNEL SCAN)
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFS 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFS 910 in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein UFS 910

Kathrein UFS 910 User Manual - German - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info