424422
16
Zoom out
Zoom in
Previous page
1/80
Next page
First Time Installation
16
First Time Installation
The first steps
Connect the receiver to the mains power supply.
Switch on the receiver by pressing the power button on the front of the
unit.
The display, "- - - -,“ appears in the LED display.
When the LED for the operating display is red, the television is in
standby.
Switch on the receiver by pressing the
button on the remote
control.
The orange LED on the front panel of the receiver flashes each
time a button on the remote control is pressed.
You will see the factory set programme on your TV screen. An infor-
mation bar indicating the programme provider, the time, the timer set-
tings, the programme status and the programme title will be displayed
in the bottom section of the screen, provided the corresponding data
is transmitted. The number of the programme memory appears in the
LED display.
The red standby indicator goes out.
You can now receive the factory set TV and radio programmes and
call them up by pressing the
buttons. Press the
and buttons to select radio programmes. Press the
or button once more to return to TV programmes.
Refer to the section " Channel list –Radio/TV" for information on how
to set up and save other TV and radio programmes.
When the receiver is switched on, t he reception status, which
was last set, always reappears.
Please check the time of day for summer or winter.
If the message "bad or no signal" appears on the screen in addition to
an on-screen display indicating the programme last received, you will
need to check the system installation and/or the receiver settings. If
this problem only applies to individual programme slots, the problem
may be due to an interruption in the transmission signal or a fault in
the receiving system (cable or satellite system).
In this case, first check the connection configuration and then check
whether the basic settings of you receiver are correct for your system.
If necessary, have a specialist do this for you.
Factory setting of receiver
Your receiver is pre-programmed to receive the ASTRA and HotBird
satellites as well as Eutelsat 10E and 16E, TurkSat 42E, Telecom 5W
and 8W. You will normally not need to make further settings. If you are
not connected to a communal or party system, you need a multifeed
arrangement with at least two LNBs in front of the satellite dish, in or-
der to receive several satellite systems. Please ask your dealer.
Before you change the basic settings of your receiver, note down the
settings in the form provided at the end of this operating manual. You
will then be able to restore the original settings at any time.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein ufd 540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein ufd 540 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein ufd 540

Kathrein ufd 540 User Manual - German - 80 pages

Kathrein ufd 540 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info