631709

Kathrein CAP 730 - MobiSet 3 Twin Manual

14
Zoom out
Zoom in
Previous page
1/64
Next page
14 from 64
Installation and connection
Fig. C
1
2
3
*
)
*
)
*
)
*
)
① Adhesive area
between the two
grooves
② Alternative roof fas-
tening
③ Washer
*
)
*
)
Not included
● Create the holes necessary to secure the mounting plate (Fig. C).
● In addition to the screwed connection, the mounting plate and roof duct must be bonded to the roof with
adhesiveandsealed.ThisisdoneusingtheSikaex
®
291 adhesive sealant supplied, which is ideally
suited for this purpose due to its broad range of adhesion. Please note the following points:
– ItisessentialthatyouhavecarefullyreadthroughthesafetydatasheetforSikaex
®
prod-
uctsandthetechnicaldatasheetbeforeyoustartworkingwiththeSikaex
®
291i adhesive
sealant!
– The prerequisite for good adhesive properties is a clean, dry and grease-free substrate. You should
therefore clean the roof surface with a suitable cleaning agent within a circumference of 35 cm
around the drilled hole and allow the surface to dry thoroughly.
– Ifthesurfaceispainted,ensurethatthepaintnishissufcientlywellbondedtothesubstrate.
– If the coat of paint is already loose or peeling, it must be removed down to a stable layer in the area
to which the adhesive will bond. If you have any doubts concerning the adhesive characteristics, con-
sult a paint and lacquer specialist, or the manufacturer of your vehicle.
– Under certain circumstances, it may be necessary for you to improve the adhesive characteristics of
the roof surface by pre-treatment with a cleaning agent available from specialist dealers (e.g. Sika
®
Cleaner) or a primer (e.g. Sika
®
Primer).
● The procedure for gluing the mounting plate is as follows:
Fig. D
1
2
① Recess for cable
② Adhesive area between the two grooves
– Ensure before starting adhesive work that the temperature of materials to be glued and the adhesive
sealant is between +5 °C and +40 °C. Prepare all necessary fastening elements and tools.
– Prepare the tube of adhesive sealant in accordance with the instructions enclosed with the tube.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 730 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 730 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 730 - MobiSet 3 Twin

Kathrein CAP 730 - MobiSet 3 Twin User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info