631709
12
Zoom out
Zoom in
Previous page
1/64
Next page
12 from 64
Installation and connection
Choose an installation position on the roof that is as horizontal as possible or only slightly sloping,
depending on the location of the vehicle, since roof inclinations greater than 5° may lead to problems
when searching for the satellite.
To ensure secure adhesion, the height difference of the roof curve may not be more than 1 cm over a
length of 2 m, as otherwise the gap between the roof and the mounting plate would be too great to be
lledbytheadhesivesealant.
As the vehicle is constantly subjected to vibration loads during travel, the roof below the antenna unit
isalsosubjecttosignicantloads.Pleasenotegiventhenatureandcapacityofyourvehicleroof(see
also operating manual for the vehicle) that the weight of the antenna unit is approx. 9.7 kg. In case of
doubt,consultaqualieddealeroryourvehicle’smanufacturer.
The roof duct provides a watertight seal through which the three connecting cables (2 x coax cables
and 1 x power supply cable) are fed into the interior of the vehicle directly underneath the turntable. If
you prefer a different method of laying the cables, they can be run from the rear of the turntable via the
channel provided in the mounting plate. The cables must then be run along the roof of the vehicle in a
protective cable duct and through a separate roof duct HDZ 100 (neither of them are supplied).
The HDZ 100 roof duct is available as an accessory under part number 20410032 from specialist deal-
ers.
Important
Do not cut the cables short, as otherwise the proper functioning of the unit can no longer be
guaranteed.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 730 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 730 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 730 - MobiSet 3 Twin

Kathrein CAP 730 - MobiSet 3 Twin User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info