631710
20
Zoom out
Zoom in
Previous page
1/36
Next page
20
Set up electrical connections. Connect UFD 170/UFD 540 receiver.
Connect connecting/control unit to battery.
Installation and connection
The antenna must always be lowered into horizontal position
(park position) while driving!
Maximum driving speed of the vehicle: 130 km/h
Installation of UFD 170
The turntable is actuated exclusively by the UFD 170 combi satellite
receiver.
The cable lengths must be taken into account when choosing the
installation location.
The UFD 170 is equipped with a power saving circuit and a separate
infrared transmitter, which means that the unit does not need to be
placed where it is visible. You can therefore t the UFD 170 out of sight
in any location, e.g. on cupboard walls, side walls or the base of storage
compartments.
Note: When choosing the installation location, bear in mind that the on/off
switch, the fuse for subsequent monitoring and the slots for inserting
common interface modules should always be accessible.
In addition, the following points should be taken into account:
The wall thickness at the installation location must be at least 12 mm,
as otherwise the screws will emerge on the other side or damage
the surface
The receiver must be placed in such a way as to allow suf cient
air circulation behind, above and next to the unit. Installation on
carpet-covered walls is therefore unsuitable
Ensure that the cupboard or storage compartment in which the unit
is housed is adequately ventilated, to prevent a build up of heat
No cables etc. placed behind or in the wall should be damaged when
tightening the screws
The receiver is designed exclusively for installation in dry, interior
locations. The installation location must be protected against
moisture
The connecting cables must be strain relieved
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 210 - MobiSet 2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 210 - MobiSet 2 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 210 - MobiSet 2 digital

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - French - 36 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info