631710
11
Zoom out
Zoom in
Previous page
1/36
Next page
11
Safety instructions - important notes
3. Connecting the power supply cable lead marked “Ignition” activates
the turntable function for automatic lowering of the antenna. This
lowering takes place as soon as the vehicle ignition circuit is turned
on. When connecting the control unit to the on-board network, it must
be ensured that the “+12V”, “Earth” and “Ignition” wires cannot be
broken by switches connected in series, as this can deactivate the
automatic lowering function.
Exceeding the normal vehicle height by not lowering the
antenna increases the risk of accidents! The driver is responsible
for the condition of the superstructure and external ttings!
4. While downloading software for the UFD 170 satellite combi receiver,
the caravan ignition may not under any circumstances be turned on
as this can result in impairment, faults or loss of function.
Never turn off the receiver (UFD 170) during the update process, as
otherwise you could lose the entire software. You would then need to
re-install it at a service centre or using a PC and null modem cable.
5. Note on satellite search: If the vehicle is not on supports during the
satellite search process and people are moving around inside it,
there is a danger that the oscillations of the vehicle will mean that the
satellite cannot be found. It should also be ensured that the vehicle is
not oscillating when software download via satellite, as otherwise the
download may fail.
6. For installation, the turntable HDP 171 may be used in conjunction
with the UFD 170 in manual mode (see “installation and connection”,
“installation of the BAS 60 planar antenna” sections).
After installation of the BAS 60 planar antenna, the HDP 171
must be put in the park position with the reset command.
The reset command can be accessed via the receiver menu
(menu element “HDP antenna set-up”). Only then is the HDP 171
released by the software for automatic searching. This concludes
the installation of the HDP 171.
The instructions in the installation and operating manuals
for these devices and for the extensions and superstructures
must absolutely be heeded!
If the fuse responds, the source of the fault must be eliminated.
The defective fuse should only ever be replaced with a fuse of the
same rated value.
Never remove or bridge the fuse in the cable or in the receiver
(UFD 170)! Cable re hazard!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 210 - MobiSet 2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 210 - MobiSet 2 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 210 - MobiSet 2 digital

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - French - 36 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info