631710
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
Operate the system from your vehicle‘s battery (12 V) or a suitable
mains power pack. This mains power pack must guarantee a stable
initial voltage of 12 V, 11 A continuous current and 15 A (300 ms) surge
current.
The transient power consumption is up to a maximum of 12 A.
To ensure reliable functioning of the connecting/control unit, the power
supply cable must be connected directly to the battery. If the power
supply is too low, the UFD 170 /UFD 540 receiver indicates this with
the on-screen message “On-board voltage too low” on the television
screen.
A 15 A fuse is integrated into the power supply cable.
If the fuse responds, the source of the fault must be eliminated and the
defective fuse replaced with a fuse of the same rated value (15 A).
Power supply, fusing
Never remove or bridge the fuse in the cable – cable re hazard!
The UFD 170 (on the front side) and the HDS 160 (in the connection
area on the back side) have a removable 10 A at fuse.
If the fuse responds, the source of the fault must be eliminated and the
defective fuse replaced with a fuse of the same rated value.
Connecting the power supply cable wire marked “Ignition” to
the ignition circuit activates the turntable function for automatic
lowering of the antenna. This lowering takes place as soon as the
vehicle ignition circuit is turned on.
When connecting the control unit to the on-board network, it must
be ensured that the “+12V”, “Earth” and “Ignition” wires cannot be
broken by switches connected in series, as this can deactivate the
automatic lowering function.
The antenna lowers after max. 12 seconds after the switching on
of the vehicle ignition circuit (if in stand-by and if the UFD 170
is switched off, otherwise the control unit lowers immediately in
operation).
Safety instructions - important notes
Checks before commencing a journey
Before commencing a journey, the antenna must always be lowered
into horizontal position (park position). If the antenna has collided
with xed or moving objects, you must check that is still securely
tted.
As the antenna is subjected to vibration loads during driving, at
regular intervals, depending on the frequency of driving, you should
check that the system is still securely tted and tighten any parts that
have come loose.
The maximum permissible speed for vehicles with a BAS 60
receiver unit mounted on the roof is 130 km/h.
Lower the antenna if it will not be used for a long period. This makes
the securing bolts more dif cult to access (protection against theft).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 210 - MobiSet 2 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 210 - MobiSet 2 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 210 - MobiSet 2 digital

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - French - 36 pages

Kathrein CAP 210 - MobiSet 2 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info