477963
17
Zoom out
Zoom in
Previous page
1/184
Next page
– 5
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from
a gravel bed.
Illustration
Connect the suction hose to the blower
connection, this will activate the blower
function.
Turn off the appliance.
Illustration
Hook the floor nozzle into the parking
position.
Turn off the appliance and disconnect
the mains plug.
Illustration
Remove the appliance head and empty
the reservoir filled with wet or dry dirt.
Illustration
Store the accessories and the mains
cable on the appliance and store the
appliance in dry rooms.
ƽ Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorized customer service.
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Clean the appliance and accessory
parts made of plastic with a commercial
plastic cleaner.
If required, rinse the container and ac-
cessories with water properly and dry
them before reuse.
Illustration
For appliances without filter clean-
ing:
Release and open the filter flap. Re-
move the frame and filter and knock the
dirt out of the filter. Clean the filter under
running water if necessary. Do not rub
or brush the filter dry.
Let it dry completely prior to installation.
Illustration
After that, insert the filter first and then
the frame.
For appliances with ExPress filter
cleaning: Use the filter cleaning (see
Chapter "ExPress filter cleaning").
Note: If the suction performance is still
not satisfactory, in spite of the cleaning,
separate the suction hose from the
pipes, hold the opening of the suction
hose shut/close it and activate the filter
cleaning button three more times with
the suction hose held shut.
The mains cable is probably dirty, clean
the mains cable.
Turn off the appliance immediately.
Illustration
Clean the floater system.
Remove the appliance head, unscrew the
floater basket (A) in the direction of the ar-
row and remove it. Remove the floater (B)
and clean both under flowing water.
If necessary, also clean the cover for
the floater valve (C): For this, release
and remove the cover. Reattach after
the cleaning process and lock it (ob-
serve the markings and symbols).
To install, first insert the floater, then
add the floater basket and lock it.
Blowing function
Interrupting operation
Finish operation
Empty the container
Storing the appliance
Maintenance and care
H
2
Clean flat fold filter
Troubleshooting
Mains cable retraction does not
function
Water is leaking
I
1
I
2
J
1
17EN
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher WD 7.200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher WD 7.200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info