477963
16
Zoom out
Zoom in
Previous page
1/184
Next page
– 4
Illustration
Turn on the machine.
Position I: Suction or blowing
Position 0: Appliance is switched off
Position MAX: Suction or blowing.
Position MAX: Vacuuming with
connected electric tool
Performance regulation: Reduce the
suction if necessary during vacuuming,
blowing or when working with an elec-
tric tool.
Position 0: The appliance is switched
off. Electric tool is supplied with voltage.
Work only with a dry flat fold filter!
Illustration
Recommendation for appliances with-
out filter cleaning: To vacuum fine dust,
use the filter bag.
The filling level of the filter bag depends
on the dirt that is sucked in.
Clogged filter bags can burst - therefore
make sure to replace the filter bag in a
timely manner!
The filter bag needs to be replaced
more frequently while sucking in fine
dust, sand, etc.
For appliances with ExPress filter clean-
ing: When vacuuming without a filter bag,
the filter cleaning indicator lights up red if
the flat fold filter needs to be cleaned.
Use the filter cleaning.
The ExPress filter cleaning is intended for
the vacuuming of large volumes of fine dust
without the filter bag inserted.
If the filter cleaning indicator is red, clean
the flat fold filter:
Illustration
Press the filter cleaning key 3 x times
with the appliance switched on; wait
about 4 seconds between the individual
presses.
Note: After several filter cleaning proc-
esses or if the filter cleaning indicator is
red, check the container for its fill vol-
ume. Empty the container if needed.
Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or
directly to the handle.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er.
Adapt the adapter to the connection di-
ameter of the electric tool using a knife
if necessary.
Illustration
A) Plug the enclosed adapter onto the
handle of the suction hose and connect
the electric tool with the connection.
or
B) Use the flexible tool hose to gain
more flexibility in your work. Connect
this hose to the suction hose and to the
adapter and then to the connection of
the electric tool.
Illustration
For appliances with built-in socket:
Connect the mains plug of the electric
power tool to the vacuum cleaner.
Switch the appliance on (move the rota-
ry switch to the left to position
MAX) and start working.
Note: The suction turbine starts with a
delay of 0.5 seconds after the electric
tool has been switched on. After the
electric tool has been switched off, the
suction turbine will continue to run for
approx. 5 seconds to suck in the re-
maining dirt from the suction hose.
For appliances without built-in socket.
For appliances with built-in socket
Dry vacuum cleaning
ExPress filter cleaning
Wet vacuum cleaning
Working with electrical power tools
16 EN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher WD 7.200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher WD 7.200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info