Manual Karcher VC 7 Cordless yourMax (page 16 of 184) (All languages)

803788

Zoom out

Zoom in

1/184

16 English

Cleaning the air inlet filter with a filter cleaning de-

vice

Note

A new air inlet filter must be installed in the dust contain-

er during filter cleaning.

1 Switch off the device.

2 Push the filter cleaning device on to the suction pipe

branch and pull the air inlet filter out of the device us-

ing the filter stick.

Illustration P

a Push the soiled air inlet filter into the filter clean-

ing device.

b Insert a new air inlet filter into the dust container.

c Switch on the device and let it run in boost mode

while turning the side cover.

Illustration Q

d Remove the cleaned air inlet filter from the filter

cleaning tool and reinsert it in the dust container

after removing the new air inlet filter.

e Check that the air inlet filter is correctly seated.

Cleaning the dust container and cyclone filter

Note

Before cleaning the dust container and cyclone filter,

empty the dust container, see chapter Ending operation

1 Switch off the device.

2 Remove the cyclone filter and air inlet filter.

a Remove the cyclone filter from the dust container

by turning it anticlockwise.

b Remove the cyclone filter from the dust container

and take the air inlet filter out of the cyclone filter.

Illustration R

ATTENTION

Short circuit hazard

There are cables or contacts in the dust container and

cyclone filter for the power supply.

Make sure that the cables or contacts do not get wet

when cleaning.

3 Clean the dust container and cyclone filter with a

soft brush or a slightly damp cloth

Illustration S

4 Clean the air inlet filter, see chapter Cleaning the air

inlet filter

5 Re-insert the dry dust container and cyclone filter

with air inlet filter into the device and close the flap.

Cleaning the HEPA filter/replacing the HEPA

filter

Note

The HEPA filter ensures clean exhaust air.

●Clean the HEPA filter if it is visibly dirty.

●Replace the HEPA filter if there is visible damage.

1. Switch off the device.

2. Cleaning the HEPA filter.

a Pull the HEPA filter cover with the HEPA filter out

of the device.

Illustration T

ATTENTION

Short circuit hazard

Power supply cables or contacts are located in the cov-

er of the HEPA filter.

Before cleaning with water, remove the cover of the

HEPA filter so that the cables or contacts do not get wet.

3. Carefully knock off the HEPA filter or if it is very dirty:

a Unscrew/remove the cover of the HEPA filter.

b Clean the HEPA filter under running water. Do not

rub or brush off.

c Then let the HEPA filter dry completely.

Illustration U

d Fasten/screw on the HEPA filter cover.

ATTENTION

Health risk

HEPA filters that are not completely dry when installed in the

device can be a breeding ground for spores and mould.

Make sure that the HEPA filter is completely dry on in-

stallation.

4. Insert the dry HEPA filter into the device.

Illustration W

Note

The HEPA filter only needs to be inserted into the de-

vice, a magnet allows the HEPA filter to snap into place

automatically.

5. Replacing the HEPA filter

a Pull the HEPA filter cover with the HEPA filter out

of the device.

Illustration T

b Unscrew/pull off the cover of the HEPA filter and

dispose of the used filter.

c Attach/screw on the new HEPA filter cover.

Illustration V

6. Insert the HEPA filter into the device.

Illustration W

Cleaning the mini turbo nozzle

1. Switch off the device.

2. Remove accessories.

ATTENTION

Short circuit hazard

The mini turbo nozzle contains electrical components.

Do not immerse the mini turbo nozzle in water or clean

it with water.

3. Clean the mini turbo nozzle.

a Press down the brush roller cover and remove

the brush roller.

Illustration AB

b Remove residue, e.g. with a brush. Any tangled

threads or hairs can be carefully cut off with scissors.

c Carefully clean the brush opening with a cloth or

soft brush.

Illustration AC

d Diagonally insert the brush roller fully into the

brush opening, pressing upwards until the cover

has clicked into place.

Illustration AD

Cleaning the multi-function nozzle

1. Switch off the device.

2. Remove accessories.

ATTENTION

Short circuit hazard

The multi-function brush contains electrical compo-

nents.

You must not immerse the multi-function brush in water

or clean it with a damp cloth.

3. Clean the multi-function brush.

a Unlock the brush roll cover / support with a coin

or other object and remove it.

Illustration X

b Remove the brush roll from the brush opening in

the direction of the arrow.

Illustration Y

c Remove the dirt e.g. with a brush. Any tangled

threads or hairs can be carefully cut off with scis-

sors.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher VC 7 Cordless yourMax in the language / languages: All languages as an attachment in your email.

The manual is 11.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher VC 7 Cordless yourMax Manual

Product: