803788
14
Zoom out
Zoom in
Previous page
1/184
Next page
14 English
3. Plug the charger into a socket.
Insert the connecting plug into the charging socket
of the wall bracket / battery.
Depending on the battery status, the 3 LED indicator
lights flash or light up green during the charging pro-
cess.
Illustration H
4. When the device is fully charged, all 3 LED indicator
lights light up continuously green for 2 minutes and
then go out.
Remove the charger from the socket/charging cable
from the battery charging socket and socket.
Illustration I
5. Remove the device from the wall bracket or insert
the battery into the device, see chapter Inserting the
battery
The device is ready for use.
Removing the battery
WARNING
Uncontrolled startup
Risk of injury
Remove the battery from the device before service and
care work or if the device is not going to be used for a
long period of time.
1. Press the unlocking button.
2. Remove the battery from the device.
Illustration J
Operation
LED display
The LEDs on the head of the device and on the battery
indicate information about the battery status, boost
mode and error messages.
The charging state of the battery is indicated by the
3 green LEDs on the device as well as by the 3 green
LEDs on the battery.
See figure A on the graphics page and chapter Descrip-
tion of the unit
The charging progress of the battery is indicated by the
3 green LEDs on the device as well as by the 3 green
LEDs on the battery. The LEDs only light up when the
battery is correctly installed.
Changing accessories
To change accessories, see chapter Installing accesso-
ries
Vacuuming
1. Install the required accessories, see chapter Install-
ing accessories.
2. Switch on the device, depending on cleaning re-
quirements:
Press the On/Off switch and keep it pressed dur-
ing operation.
or
Turn the locking lever to switch the device directly
to continuous operation.
Illustration K
Note
The LED strip on the device indicates the strength of the
dust intake. The higher the dust intake, the greater the
area of the LED display will be illuminated.
Approx. 10 % of the LED strip is continuously lit even
when no vacuuming is being performed.
Illustration L
3. If necessary, press the Boost button to manually in-
crease the dust intake.
Illustration M
Battery charging state
LED (green) Meaning
1st LED flashes slowly (1 s
on/1 s off)
Battery charged below
7.5 %
1st LED lights up continu-
ously
Battery charged below
40 %
1st and 2nd LEDs light up
continuously
Battery charged below
70 %
3 LEDs light up continu-
ously
Battery charged above
70 %
3 LEDs flash quickly Battery fault, after 30 s the
signal goes out
While charging
LED (green) Meaning
* 1st LED flashes slowly Battery charging, battery
charged below 40 %
1st LED lights up continu-
ously
* 2nd LED flashes slowly
Battery charging, battery
charged below 70 %
1st and 2nd LEDs light up
continuously
* 3rd LED flashes slowly
Battery charging, battery
charged below 99 %
3 LEDs light up continu-
ously, then go out
Battery fully charged
* 0.2 s from off to on/0.6 s on/0.2 s from on to off/1 s off
Error message
LED (red) Meaning
Suction duct LED flashes
quickly
Suction duct blocked
Floor nozzle LED flashes
quickly
Floor nozzle blocked
Dust sensor LED flashes
quickly
Dust sensor fault
Switching the device off
and on again
See also chapter Troubleshooting guide
Boost mode
LED (green) Meaning
LED half ring and dust sen-
sor display lights up contin-
uously
Entire dust sensor display
lights up continuously
Boost mode on
Dust sensor display
LED (green) Meaning
~10 % of the LED strip
lights up continuously
Dust sensor display on
~50 % of the LED strip
lights up continuously
Dust intake normal
~100 % of the LED strip
lights up continuously
Dust intake high
While charging
LED (green) Meaning
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher VC 7 Cordless yourMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher VC 7 Cordless yourMax in the language / languages: All languages as an attachment in your email.

The manual is 11.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info