804770
15
Zoom out
Zoom in
Previous page
1/176
Next page
English 15
Sharpening the blade sections
Note
Remove as little material as possible during sharpening
and maintain the original angle of the blade tooth in the
process.
CAUTION
Sharp blade
Incision injuries
Wear suitable protective gloves when sharpening the
blade sections.
1. Clamp the blade in a vice.
2. Sharpen the exposed side of the blade teeth with a
file.
3. Carefully push the blade further by hand so that the
unsharpened blade teeth are accessible.
4. Sharpen the exposed side of all blade teeth with a
file.
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
As the battery pack ages, even if it is looked after, its ca-
pacity reduces such that the full run time will no longer
be reached when fully charged. This does not indicate a
defect.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Subject to technical modifications.
Vibration and noise value
The total vibration values given and the noise emission
values given were measured according to a standard
test procedure and can be used to compare one tool
with another. The declared total vibration values and the
declared noise emission values can also be used for a
preliminary exposure assessment.
WARNING
Vibration and noise emissions during actual use of the
power tool may differ from the values given, depending
on the tool and in particular the type of workpiece used.
Identify the safety measures to protect the operator on
the basis of an exposure estimate under actual use con-
ditions (taking into account all parts of the operating cy-
cle, such as the release time).
Device with a hand-arm vibration value
> 2.5 m/s² (see chapter Technical Data in the
operating instructions)
CAUTION ● Uninterrupted use of the device
for several hours can lead to numbness. ● Wear warm
gloves to protect your hands. ● Take regular breaks
from work.
Fault Cause Rectification
The device stops during
operation
Blade blocked with cutting material. Remove cutting material from the blade.
Motor has overheated Stop working and allow the motor to cool
down.
Problems when mount-
ing the shaft compo-
nents
The connection points are dirty. Clean the shaft ends of adhering dirt.
Only place the accessories on clean sur-
faces.
MT 36
Bp
MT HT
550/36
Device performance data
Working voltage of the bat-
tery
V36
Maximum speed /min 10000 ±
10%
Cutting blade length cm 55
Tooth pitch mm 28
Working range (max.) m 3,1
Dimensions and weights
Length x width x height mm 951 x
197 x
188
1305 x
125 x 87
Weight (with battery pack) kg 2,6 2,3
Device performance data (measured with MT 36 Bp
Multi-Tool)
Max. speed /min 1820 ±
10%
Sound power level as per EN 62841-1 and
EN 62841-4-2 (measured with MT 36 Bp Multi-Tool)
Sound pressure level LpA dB(A) 85,9
Uncertainty KpA dB(A) 3,0
Sound power level LwA dB(A) 93,9
Uncertainty KWA dB(A) 0,5
Vibration value according to EN 62841-1 and
EN 62841-4-2 (measured with MT 36 Bp Multi-Tool)
Front handle hand-arm vi-
bration value
m/s23,8
Rear handle hand-arm vi-
bration value
m/s23,0
Uncertainty K m/s21,5
MT 36
Bp
MT HT
550/36
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher MT HT 550-36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher MT HT 550-36 in the language / languages: All languages as an attachment in your email.

The manual is 4.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info