478380
13
Zoom out
Zoom in
Previous page
1/168
Next page
English 13
ƽ
Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
The appliance is maintenance-free.
Prior to longer periods of storage, e.g. in the win-
ter:
Î Completely drain all water from the appli-
ance: Switch the appliance on with detached
high-pressure hose and detached water sup-
ply (max. 1 minute) and wait, until no more
water exits at the high-pressure connection.
Turn off the appliance.
Î Remove filter from suction hose for deter-
gent and clean under running water.
Î Pull out the sieve in the water connection us-
ing flat-nose pliers and clean under running
water.
Caution
Protect the appliance and its accessories against
frost.
The appliance and its accessories can get de-
stroyed through frost if there are any water resi-
dues in them. To avoid damage to them:
Î Store the appliance and the entire accesso-
ries in a frost-safe room.
Use only original Kärcher spare parts. You will
find a list of spare parts at the end of these oper-
ating instructions.
You can rectify minor faults yourself with the help
of the following overview.
If in doubt, please consult the authorized custom-
er service.
ƽ Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the au-
thorized customer service.
Î Check whether the voltage indicated on the
type plate corresponds to the voltage of the
mains supply.
Î Check the mains connection cable for dam-
ages.
Î Check setting at the spray lance.
Î Appliance ventilation: Switch the appliance
on with the high-pressure hose detached
and operate until the water exits the high-
pressure connection without bubbles. Switch
off appliance and reconnect high-pressure
hose.
Î Check the water supply.
Î Pull out the sieve in the water connection us-
ing flat-nose pliers and clean under running
water.
Cause: Voltage reduction due to weak mains
supply or when using an extension cable.
Î When switching on, first pull the lever of the
trigger gun and then switch the appliance
switch to "I/ON".
Î Clean high-pressure nozzle: Remove dirt
and debris from the nozzle bore, using a nee-
dle and rinse through with water towards the
front.
Î Check water flow quantity.
Î Slight leakage from the appliance pump is
normal. If the leakage increases contact the
authorized customer service.
Î Use spray lance with pressure regulation
(Vario Power).
Turn the spray lance to "Mix" position.
Î Clean filter at the detergent suction hose.
Î Check the detergent suction hose for kinks.
Maintenance and care
Maintenance
Storage
Frost protection
Spare parts
Troubleshooting
Appliance is not running
Pressure does not build up in the appliance
Appliance does not start, motor hums
Strong pressure fluctuations
Appliance is leaking
No detergent infeed
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K 3.98M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 3.98M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info