Manual Karcher K 3.98M (page 11 of 168) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

478380

Zoom out

Zoom in

1/168

English 11

When unpacking the product, make sure that no

accessories are missing and that none of the

package contents have been damaged. If you

detect any transport damages please contact

your dealer.

1 ON/OFF switch for appliance

2 Power cable with plug

3 High pressure connection

4 High pressure hose

5 Trigger gun

6 Lock trigger gun

7 Connection for water supply with filter

8 Coupling element for water connection

9 Suction hose for detergent

10 Storage for trigger gun

11 Storage for high-pressure hose

12 Storage for spray lance

13 Transport handle

14 Spray lance with pressure regulation (Vario

Power)

15 Spray lance with dirt blaster

Special accessories expand the possibilities of

using your appliance. Please contact your Kärch-

er dealer for further information.

Illustrations on Page 2

Illustration

Mount loose parts delivered with appliance prior

to start-up.

Illustration

Î Pull out the clamp for the high-pressure hose

from the trigger gun (e.g. a small screwdriv-

er).

Î Connect high pressure hose to trigger gun.

Î Push the clamp in until it locks. Check the se-

cure connection by pulling on the high-pres-

sure hose.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water net without

a system separator. Use a suitable sys-

tem separator manufactured by Kärcher; or, as

an alternative, a system separator as per EN

12729 Type BA.

Note: Impurities in the water can damage the

high-pressure pump and the accessories. For

protection, the use of the Kärcher water filter (op-

tional accessory, order no. 4.730-059) is recom-

mended.

Observe regulations of water supplier.

For connection values, see type plate/technical

data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

Illustration

Î Screw the coupling unit (supplied) to the wa-

ter connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water supply.

This high-pressure cleaner is suited to work with

the Kärcher suction hose with backflow valve

(Optional accessory, order no. 4.440-238) to

draw in surface water, e.g. from water butts or

ponds (see specifications for max. suction

height).

Î Fill the Kärcher suction hose with backflow

valve with water, screw to water supply and

hang into he water butt.

Î Separate the high pressure hose from the

high pressure connection point of the appli-

ance.

Î Switch the appliance on "I/ON" and operate

until the water exits the high-pressure con-

nection without bubbles.

Î Turn off the appliance "0/OFF".

Caution

Never operate the high-pressure cleaner when

the tap is turned off as dry running will damage

the high-pressure pump.

Illustration

Î Connect the high pressure hose to the high

pressure connection of the appliance.

Illustration

Î Push the spray lance into the trigger gun and

fasten it by turning it through 90°.

Commissioning and operation

Description of the Appliance

Special accessories

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Start up

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 3.98M in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher K 3.98M Manual

Product: