538466
9
Zoom out
Zoom in
Previous page
1/17
Next page
English HDS Super, HDS 695 S, HDS 745, HDS 895 S, HDS 995, HDS 1195, HDS 1295 9
Safety shut-off
The pump automatically shuts down for safety
reasons if the handgun is neither opened or
closed for more than 30 minutes.
To switch it on again turn the main switch to
"0" and then back to the "I" position.
(The EPROM without disabling 6.682-595.0 is
available from service)
EACH TIME AFTER USAGE
Following operation with cleaning agent
Set the cleaning agent metering valve
(item 31) to "0"
Set the unit switch (item 23) to "I"
Actuate handgun and flush unit for
approx. 1 min
Stopping machine
Set the unit switch (item 23) to "0"
Shut off water supply
Switch the pump briefly on with the unit switch
(item 23) (approx. 5 sec.)
Remove mains plug from socket ONLY with
dry hands
Detach water connection
Actuate handgun to depressurise unit
Lock the hand spray gun Figure 8
Engage spray lance in cover holder
Reel up the high-pressure hose and electric
cables and attach them to fastenings
* Take care not to kink high-pressure hose and
cable!
Frost will destroy unit if water is not drained off
completely!
Store unit in a frost-free location
Take unit out of service if frost-free storage is
not possible.
READING THE OPERATING HOURS
(ONLY HDS 995 AND HDS 1295)
When you open the storage compartment cover
flap,you will notice the electronic operating
hours display in the viewing window, e.g.
= 245 hours.
DISCONTINUATION OF USAGE
In the event of lengthy periods of non-use or if
frost-free storage is not possible:
Drain off water and flush out equipment with
antifreeze
Drain cleaning fluid tank
Drain off water
Unscrew water supply hose and high-
pressure hose
Unscrew supply line at boiler base and allow
heating coil to drain
Run unit for max. 1 min until pump and lines
are empty
Flushing unit with anti-freeze
Fill the float tank with a commercially
available antifreezing compound
Swith the unit on (without the burner) until it is
thoroughly purged
Observe handling instructions of antifreeze
manufacturer
By this means, a certain degree of corrosion
protection is achieved
MAINTENANCE
* Disconnect unit from mains before carrying
out any maintenance or repair work.
* Always use genuine spare parts
Shut off unit before performing any work, refer
to AFTER USE.
Set the unit switch (item 23) to "0"
Pull power plug out of socket
Shut off water supply
Actuate handgun to depressurise unit.
Detach water connection
Allow unit to cool down
Please consult your Kärcher dealer for
details of regular safety
inspection/maintenance agreement
Maintenance intervals
Once a week
Clean strainer in water connection
Check oil level
Contact Kärcher AFTER-SALES SERVICE
immediately if oil is opaque!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 745 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 745 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info