726176
26
Zoom out
Zoom in
Previous page
1/384
Next page
– 7
Set the appliance switch to "OFF" and in-
sert the mains plug in to the receptacle.
Note: In case of an incorrector motor rota-
tion, the electronics will switch the motor off
after a few seconds and the indicator lamp
for the rotation direction will light up. To re-
mediate this fault, see "Fault assistance".
Set appliance switch to desired operat-
ing mode.
Set the working pressure and feed
quantity by turning (steplessly) the
pressure/quantity regulation mecha-
nism at the hand spray gun (+/-).
DANGER
Risk of injury! When adjusting the pressure/
quantity regulation, make sure that the
screw connection of the spray lance does
not become loose.
The two pumps sets are controlled on de-
mand via pressure switches.
For considerate treatment of the envi-
ronment use detergent economically.
The detergent must be suitable for the
surface to be cleaned.
Set the switch for the automatic deter-
gent dosing (AUTO CHEM) to the "0"
position.
Set the detergent dosing valve to the
desired detergent (CHEM 1 or CHEM 2)
and the desired concentration.
The desired detergent will be dispensed
after the hand spray gun is opened.
Set the switch for the automatic deter-
gent dosing (AUTO CHEM) to the "1"
position.
Set the detergent dosing valve to the
desired detergent (CHEM 1 or CHEM 2)
and the desired concentration.
Open the hand spray gun.
No detergent is added to the high pres-
sure jet.
Close the hand spray gun and reopen it
within 3 seconds.
Detergent is added to the high pressure
jet.
The indicator lamp detergent dispens-
ing lights up.
If the hand spray gun remains closed
for more than 3 seconds, no more de-
tergent will be added.
After closing the hand spray gun, the
detergent dispensing will be switched
off and the indicator lamp for the deter-
gent dispensing will shut off.
For another detergent dispensing, open
the hand spray gun, close it and reopen
it within 3 seconds.
The appliance has 2 high pressure outlets.
Unscrew the plug of the second high
pressure outlet.
Connect the second hand spray gun with
the high pressure hose (accessory).
Attach high pressure nozzles size
25052 to both spray lances.
The two pumps sets are controlled on de-
mand.
Set pressure/temperature and deter-
gent concentration according to the sur-
face to be cleaned.
Note: To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.
Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
Remove the dirt:
Spray off loosened dirt with the high
pressure jet.
Turning on the Appliance
Set working pressure and flow rate
Pressure/ quantity regulation at the
hand spray gun
Operation with detergent
Detergent control, manual
Detergent control, automatic
Operation with 2 hand spray guns
Cleaning
Recommended cleaning method
26 EN
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 2000 Super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 2000 Super in the language / languages: All languages as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info