726176
24
Zoom out
Zoom in
Previous page
1/384
Next page
– 5
The liquid softener prevents the calcifi-
cation of the heating spiral while operat-
ing with calciferous tap water It is dosed
into the swimmer tank drop by drop.
The metering is set to medium water ri-
gidity by the manufacturer
This setting can be adjusted to local
conditions by customer service.
Note: A sample bundle of liquid softener is
included in the delivery.
Fill in liquid softener RM 110 into the fill
vent for liquid softener (white tank).
When working with soft water (such as rain
water), you can work without liquid soften-
er.
Remove the lid from the vent opening
for liquid softener.
Insert the included spring onto the lid
support.
Replace the lid.
Note: This will prevent the indicator lamp
for the liquid softener from blinking per-
manantly.
Note: When working with tap water, this
spring will have to be removed again.
DANGER
Risk of injury!
Use Kärcher products only.
Under no circumstances fill solvents
(petrol, aceton, diluting agent etc.)
Avoid eye and skin contact.
Observe safety and handling instruc-
tions by the detergent manufacturer.
Kärcher offers an individual cleaning
and care appliances program.
Your dealer will consult you gladly.
Refill detergent.
For connection values refer to technical
specifications.
Connect the supply hose (minimum
length 7.5 m, minimum diameter 3/4“) to
the water connection point of the ma-
chine and at the water supply point (for
e.g. a tap).
Note: The supply hose is not included.
If you want to suck in water from an exter-
nal vessel, the following modification is
necessary:
Remove the water connections from the
pump heads.
Unscrew the upper supply hoses to the
swimmer tanks and connect them to the
pump heads.
Connect suction hose (minimum diame-
ter 3/4“) with filter (accessory) to the
water connection point.
Until the pump sucked in water, you should:
Set the pressure/quantity regulation to
maximum quantity.
Close the dosing valve for the detergent.
DANGER
Risk of personal injury or damage! Never
suck in water from a drinking water contain-
er. Never suck in liquids which contain sol-
vents like lacquer thinner, petrol, oil or unfil-
tered water. The sealings within the device
are not solvent resistant. The spray mist of
solvents is highly inflammable, explosive
and poisonous.
For connection values, see technical
data and type plate.
The electrical connections must be
done by an electrician according to IEC
60364-1.
DANGER
Risk of injury on account of electric shock!
Unsuitable electrical extension cables
can be hazardous. Only use electrical
extension cables outdoors which have
been approved and labelled for this pur-
pose and have an adequate cable
cross-section.
Fill in liquid softener
Working without liquid softener
Refill detergent
Water connection
Suck in water from vessel
Power connection
24 EN
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HDS 2000 Super at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HDS 2000 Super in the language / languages: All languages as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info