Manual Karcher HD 7-16-4 ST (page 22 of 168) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

726313

Zoom out

Zoom in

1/168

- 5

Note:

The appliance is equipped with a pressure

switch. The motor starts up only when the

lever of the pistol is pulled

Open the water supply.

Plug in the mains plug.

(Only with appliance versions with pow-

er cable and mains plug).

Set the appliance switch to "I".

The indicator lamp glows green.

Release the trigger gun. To do so, push

the safety catch towards the back.

Open the hand spray gun.

DANGER

When adjusting the pressure/quantity regu-

lation, make sure that the screw connection

of the spray lance does not become loose.

Set working pressure and water quanti-

ty by turning (rungless) at the pressure

and quantity regulation (option) (+/-).

Close the hand spray gun.

Turn the casing of the nozzle till the de-

sired symbol matches the marking.

몇CAUTION

Unsuitable detergents can cause damage

to the appliance and to the object to be

cleaned. Use only those detergents that

have been approved by Kärcher. Observe

the dosage and other instructions provided

with these detergents. For considerate

treatment of the environment use detergent

economically.

Follow the safety instructions for using de-

tergents.

Kärcher detergents ensure smooth func-

tioning. Please consult us or ask for our cat-

alogue or our detergent information sheets.

Place the detergent can under the de-

vice.

Hang in the detergent hose into the de-

tergent can.

Set nozzle to "CHEM".

Set dosing value for detergent to the

desired concentration.

Spray the detergent sparingly on the

dry surface and allow it to react, but not

to dry.

Spray off loosened dirt with the high-

pressure ray.

After operations, dip the filter in clear

water. Turn the dosing valve to the

highest detergent concentration. Start

the appliance and rinse for one minute.

Close the hand spray gun.

The appliance switches off.

Secure the trigger gun. To do so, push

the safety catch towards the front.

After the interruption:

Release the trigger gun. To do so, push

the safety catch towards the back.

Open the hand spray gun.

The appliance will switch on again.

The operational readiness period starts

when the trigger gun is closed. The device

can no longer be started by opening the

trigger gun if this operational readiness pe-

riod (5 to 120 minutes) expires.

The indicator lamp blinks green.

To restart, turn the device switch briefly

to "0" and then again to "I".

Note:

Customer service can set the operational

readiness period.

Set the appliance switch to "0".

Wait for a while.

Set the appliance switch to "I".

Use the respective button on the re-

mote control (option).

Shut off water supply.

Open the hand spray gun.

Switch on the pump with the power

switch and allow to run for about 5-10

seconds.

Close the hand spray gun.

Set the appliance switch to "0/OFF“.

Pull main plug out of socket with dry

hands only.

(Only with appliance versions with pow-

er cable and mains plug).

Remove water connection.

Activate hand spray gun until device is

pressure less.

Secure the trigger gun. To do so, push

the safety catch towards the front.

ATTENTION

Frost will destroy the not completely water

drained device.

The machine should be stored in frost-free

rooms. In case there is frosting risk, for e.g.

if the machine is installed in open areas,

then the machine must first be emptied and

flushed using an anti-freezing agent.

Remove the water inlet hose on the ap-

pliance.

Unscrew the high pressure hose from

the appliance.

Let the appliance run till the pump and

pipes are empty (max. 1 minute).

In case of longer operational breaks:

Fill in normal anti-frost agents in the

swimmer tank right until the top.

Place the collection trough under the

high pressure exit.

Turn on the equipment and let it run un-

til the equipment is completely rinsed.

Turn the emergency-stop switch to "0".

Shut off water supply.

Activate trigger gun until device is pres-

sure-less.

Unscrew the fastening screw of the ap-

pliance cover.

Slightly lift up the appliance cover and

remove it toward the front.

몇CAUTION

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

ATTENTION

Protect the trigger from damage during

transport.

When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

몇CAUTION

Risk of injury and damage! Note the weight

of the appliance in case of storage.

DANGER

Risk of injury! Switch off the power switch

with all maintenance and repair work.

Pull the mains plug and secure it against

being plugged in again

DANGER

Risk of injury on account of the emanating

water jet that could be hot!

During all tasks:

–Close locking tap of fresh water.

–Let the hot parts of the plant cool down.

–Depressurise the plant by opening all

hand-spray guns.

The bases of a safe operating of the equip-

ment is thr regularly maintenance accord-

ing to the following maintenance plan.

Use exclusively original parts of the manu-

facturer or those parts recommended by

him like

– replacement and wear parts

– Accessory parts

–Fuel

– Detergent

High pressure operation

Select spray type

High pressure circular spray

(0°) for specially stubborn dirt

Flat low pressure spray

(CHEM) for operating using de-

tergents or cleaning at low

pressure.

High pressure flat spray (25°)

for large dirt areas

Operation with detergent

Recommended cleaning method

Interrupting operation

Operational readiness period

Restart the operation readiness time

Turn off the appliance

Frost protection

Emptying the appliance

Switch-off in case of emergency

Remove the appliance cover

Transport

Storing the device

Care and maintenance

22 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 7-16-4 ST in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher HD 7-16-4 ST Manual

Product: