Manual Karcher HD 18-50-4 Cage Classic (page 17 of 296) (All languages)

726243

Zoom out

Zoom in

1/296

– 4

몇 WARNING

Risk of injury due to unsuitable accesso-

ries. Only use accessories that are ap-

proved for the working pressure of the de-

vice (see "Technical Data").

Only install accessories while the device is

switched off.

Maximum tightening torque of the screwed

connections of the high-pressure hose; 20 Nm.

 Connect high pressure hose and spray

pipe to the hand spray gun.

 Mount the power nozzle on the spray

pipe. Tighten covering nut firmly.

 Connect the high pressure hose to the

high pressure connection point of the

machine.

– For connection values refer to technical

specifications.

– The electrical connections must be

done by an electrician according to IEC

60364-1.

몇 WARNING

The highest allowed net impedance at the

electrical connection point (refer to techni-

cal data) is not to be exceeded.

In case of any uncertainty regarding the

present net impedance at your connection

point, please contact your local power sup-

ply company.

 DANGER

– Check whether the voltage data on the

type plate corresponds with the voltage

of the power source.

– Unsuitable electrical extension cables

can be dangerous. Only use approved

and appropriately marked electrical ex-

tension cables with a sufficient line

cross section when outdoors:

1 - 10 m: 10 mm

10 - 30 m: 16mm

With this appliance model, the matching

mains plug must be installed onto the

mains connecting line by an electrician.

몇 WARNING

Observe regulations of water supplier.

According to applicable regula-

tions, the appliance must never be

used on the drinking water net

without a system separator. A suit-

able system separator by KÄRCHER or al-

ternatively a system separator according to

EN 12729 type BA must be used.

Water that was flowing through a system

separator is considered non-drinkable.

몇 CAUTION

Always connect the system separator to

the water supply, never directly to the appli-

ance!

For connection values refer to technical

specifications.

 Connect the supply hose (minimum

length 7.5 m, minimum diameter 1“) to

the water connection point of the appli-

ance (such as the tap).

The supply hose is not included.

 Open the water supply.

ATTENTION

Dirty water

Premature wear and tear or deposits in the

device.

Supply the device using only clean water,

or recycled water that does not exceed the

specified limit values.

The following limit values apply to the water

supply:

– Upstream water filter: ≤10 µm

– Solid body content: maximum 50 mg/l

– Total hardness: 3-15° dH, 30-150 mg/l

CaO, 54-268 mg/l CaCO

– Calcium hardness: 0.89-2.14 mmol/l

– pH value: 6.5-9.5

– Base capacity pH 8.2: 0-0.25 mmol/l

– Total dissolved substances: 10-75 mg/l

– Electrical conductivity: 100-450 µS/cm

– Chloride, e.g. NaCl: <100 mg/l

– Iron, Fe: <0.2 mg/l

Attaching the Accessories

Power supply

60 Hz model

Water connection

Water supply limit values

17EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 18-50-4 Cage Classic in the language / languages: All languages as an attachment in your email.

The manual is 6,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher HD 18-50-4 Cage Classic Manual

Product: