726243
16
Zoom out
Zoom in
Previous page
1/296
Next page
– 3
or bent even if there is no externally vis-
ible damage.
Store the high-pressure hoses in such a
way that they are not subject to any me-
chanical load.
Maximum tightening torque of the
screwed connections of the high-pres-
sure hose; 20 Nm.
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
The switch prevents unintented starting of
the appliance. Stop the appliance during
breaks or after operation.
The safety catch on the handgun prevents
the handgun from being released uninten-
tionally.
only for Classic variant
If the hand spray gun is closed, the
overflow valve opens and the entire wa-
ter volume will flow back to the pump
suction side.
Overflow valve is set and sealed by the
manufacturer. Setting only by customer
service.
only for Advanced variant
If the hand spray gun is closed, the
overflow valve opens and the entire wa-
ter volume will flow back to the pump
suction side.
If the trigger gun is closed, the water
pressure in the high-pressure hose is
reduced. This reduces the actuating
force of the trigger gun and increases
the service life of the device.
Overflow valve is set and sealed by the
manufacturer. Setting only by customer
service.
The safety valve opens when the overflow
valve is defective.
The safety valve is set by the manufacturer
and sealed. Setting only by customer ser-
vice.
The lack of water fuse shuts off the engine
when the water supply is scarce (water
pressure too low).
The indicator lamp "lack of water" will illumi-
nate.
The thermostat valve protects the high-
pressure pump from unacceptable heating
during circuit operation when the trigger
gun is closed.
The thermostat valve opens when the per-
missible water temperature of 80°C is ex-
ceeded and lets out the hot water into the
open.
The motor protection switch interrupts the
electric circuit if the motor is overloaded.
DANGER
Risk of injury! Device, supply lines, high-
pressure hose and connections must be in
faultless condition. If they are not in a per-
fect condition then the device must not be
used.
Replace the transport screw with the
supplied bleed screw.
Check oil level of the high pressure
pump.
The oil level must be at the centre of the
oil level display.
Add oil if required (see technical speci-
fications).
Safety Devices
Power switch
Safety catch
Overflow valve
Overflow valve with pressure relief
Safety valve
Water shortage safeguard
Thermostat valve
Motor protection switch
Start up
Check oil level
16 EN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 18-50-4 Cage Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 18-50-4 Cage Classic in the language / languages: All languages as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info