725302
19
Zoom out
Zoom in
Previous page
1/312
Next page
– 6
DANGER
When adjusting the pressure/quantity regu-
lation, make sure that the screw connection
of the spray lance does not become loose.
Working pressure or quantity can be adjust-
ed either at the pump unit or at the hand
spray gun.
Do not reduce the pressure/ quantity simul-
taneously at both the regulators. The fol-
lowing procedure is to be followed compul-
sorily:
Set (+) working pressure and quantity to
maximum at the hand spray gun.
Set the working pressure and quantity
by turning the pressure/ quantity regula-
tion mechanism at the pump unit.
The working pressure can be read from
the manometer.
Open the hand spray gun.
Set the pressure/ quantity regulation at
the pump unit to maximum working
pressure and quantity by turning in
clock-wise direction.
Set (+/-) the working pressure and
quantity by turning the pressure/ quan-
tity regulation mechanism at the hand
spray gun.
Open the hand spray gun.
Close the hand spray gun.
The appliance switches off after 30 sec-
onds.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Store the hand spray gun and spray
pipe in the accessory mount.
After the interruption:
Release the trigger gun. To do so, push
the safety catch towards the back.
Open the hand spray gun.
The appliance will switch on again.
After operating the water using saline
water (sea water), open the hand spray
gun and rinse the appliance for at least
2 - 3 minutes using tap water.
Shut off water supply.
Open the hand spray gun.
Switch on the pump with the power
switch and allow to run for about 5-10
seconds.
Close the hand spray gun.
Set the appliance switch to "0/OFF“.
Pull main plug out of socket with dry
hands only.
Remove water connection.
Activate hand spray gun until device is
pressure less.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
ATTENTION
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
Store the appliance in a heated room dur-
ing winter or empty it. During longer breaks
in operation, it is advisable to pump in anti-
frost agents into the appliance.
Screw off water supply hose and high
pressure hose.
Blow through machine with com-
pressed air.
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
Set working pressure and flow rate
Pressure/ quantity regulation at the
pump unit
Pressure/ quantity regulation at the
hand spray gun
Interrupting operation
Turn off the appliance
Frost protection
Drain water
Flush device with anti-freeze agent
19EN
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 16-15-4 Cage Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 16-15-4 Cage Plus in the language / languages: All languages as an attachment in your email.

The manual is 10,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info