725305

Karcher HD 10-16-4 Cage Manual

22
Zoom out
Zoom in
Previous page
1/320
Next page
– 8
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
DANGER
Risk of injury!
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
몇WARNING
Repair work and work on electrical compo-
nents may only be performed by the author-
ized customer service in non-explosion
danger areas.
– No power
Check the plugs and sockets.
Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the socket.
Check the mains connection cable for
damages.
– Engine is overheated
Switch off appliance and let it cool
down. Remove the cause of the prob-
lem. Turn on the appliance again.
– Wrong nozzle
Check nozzle for correct size (see tech-
nical specifications).
– Air within the system
Vent pump:
Unscrew the nozzle. Switch on the ap-
pliance and let it run until the water ex-
iting from the spray pipe is bubble-free.
Switch off the appliance and fit the noz-
zle again.
– Nozzle is blocked/ washed out
Clean/ replace nozzle.
– Filter at the water connection is dirty
Clean filter at the water connection.
– Amount of water supply is too low.
Check water supply level (refer to tech-
nical data).
– Pipe inlets to pump are leaky or blocked
Check all supply lines to the high-pres-
sure pump for leaks or blockages.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
– Pipe inlets to pump are leaky or blocked
Check all supply lines to the high-pres-
sure pump for leaks or blockages.
– Air within the system
Vent pump:
Unscrew the nozzle. Switch on the ap-
pliance and let it run until the water ex-
iting from the spray pipe is bubble-free.
Switch off the appliance and fit the noz-
zle again.
– Amount of water supply is too low.
Check water supply level (refer to tech-
nical data).
– Incorrect nozzle inserted.
Replace the high-pressure nozzle with
the low-pressure nozzle.
– Filter at the detergent suction hose dirty
Clean filter.
– Backflow valve stuck
Remove the detergent hose and loosen
the backflow valve using a blunt object.
– Detergent container is empty
Fill/replace detergent container.
– The warranty terms published by our
competent sales company are applica-
ble in each country. We will repair po-
tential failures of the appliance within
the warranty period free of charge, pro-
vided that such failure is caused by
faulty material or defects in fabrication.
– The warranty comes only into effect if
your vender fills out the supplied reply
card completely at purchase, stamps
Troubleshooting
Appliance is not running
Device is not building up pressure
High pressure side is leaky
High pressure pump is vibrating
Water jet is not uniform
Device is not sucking in detergent
Warranty
22 EN
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 10-16-4 Cage at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 10-16-4 Cage in the language / languages: All languages as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info