725305
21
Zoom out
Zoom in
Previous page
1/320
Next page
– 7
Note:
Observe handling instructions of the anti-
freeze agent manufacturer.
Pump in conventional frost protection
agents through the appliance.
A certain corrosion protection is achieved
with this as well.
DANGER
Risk of injury!
Always switch off the appliance and pull out
the mains plug before care and mainte-
nance work.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
Check oil level of the high pressure
pump.
The oil level must be between the “MIN“
and “MAX“ markings on the oil contain-
er.
Add oil if required (see technical speci-
fications).
ATTENTION
Risk of damage! In case of lacteous oil in-
form Kärcher customer service immediate-
ly.
Clean filter at the water connection.
Clean filter at the detergent suck hose.
Check the swimmer valve in the swim-
mer container for leaks.
Change the oil in the high pressure
pump.
Have the maintenance of the device
performed by the customer service.
Change the oil in the high pressure
pump.
Unscrew the filter casing, remove the
filter, clean it and replace it.
Take out detergent suck hose.
Clean filter in water and reinstall.
For oil type refer to technical specifica-
tions.
Turn out the oil drain screw.
Drain the oil in a collection basin.
Screw in oil drain plug.
Slowly fill in new oil until the "MAX"
marking on the oil container.
Note:
Air pockets must be able to leak out.
Flush device with anti-freeze agent
Care and maintenance
Safety inspection/ maintenance
contract
Maintenance intervals
Daily
Weekly or after 40 operating hours
After 50 operating hours
Every 500 operating hours, at least
annually
Maintenance Works
Clean filter at the water connection
Clean filter at the detergent suck hose
Oil change
Dispose of old oil ecologically or turn in at
a gathering point.
Maintenance schedule
Wear parts Operating
hours
High-pressure/low-pres-
sure seals
1000 h
Suction/pressure valves 1000 h
O-rings/support rings of the
overflow valve
1000 h
Ball bearing of the pump
gear
2000 h
Oil races, shaft seal 2000 h
21EN
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher HD 10-16-4 Cage at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher HD 10-16-4 Cage in the language / languages: All languages as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info