804532
13
Zoom out
Zoom in
Previous page
1/144
Next page
English 13
Remove the blockage
Suction pipe/suction hose
Suction hose at brush head
Roller brush/brush head
Note
Remove the brush cover if necessary to make the work
easier (see "Cleaning the roller brush").
Motor not running
No electrical voltage present
Check the power socket and power supply fuse.
Check the mains cable and the mains plug of the de-
vice.
Check the mains cable plug connection at the han-
dle.
The thermal protection switch has switched off the mo-
tor due to overheating
Check the filter and suction hose. Replace the used
filter or remove the blockage from the suction hose.
Allow the appliance to cool down.
Unsatisfactory vacuuming result
Check the roller brush for blocking objects and re-
move these if present.
Remove blockages from the brush head, suction
pipe and suction hose.
Replace the filter bag.
Replace the exhaust filter or motor protection filter.
Set the fibre height selection knob to the correct set-
ting .
Replace the roller brush.
Filter indicator lamp lights up
orange
Remove blockages from the brush head, suction
pipe and suction hose.
Replace the filter bag.
Electronic brush monitoring indicator light lights up
orange
Set the fibre height selection knob to a lower fibre
height.
Indicator light - electronic brush monitoring indica-
tor light lights up even at the lowest setting
Replace the roller brush.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Dry vacuum cleaner
Type: 1.033-xxx
Type: 1.057-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2009/125/EC
2011/65/EU
2014/30/EU
Harmonised standards used
EN 50581
EN 55014-1: 2017
EN 55014-2: 2015
EN 60312-1: 2017
EN 60335-1
EN 60335-2-69
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
National standards used
-
Harmonised directive(s)
666/2013
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher CV 38-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher CV 38-2 in the language / languages: All languages as an attachment in your email.

The manual is 9.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info